1 / 5
Fiat Punto Sunroof Blind Hook / Handle Replacement — image 1
1 / 5

Fiat Punto Sunroof Blind Hook / Handle Replacement

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replacement hook/handle for attaching the sunroof blind in a Fiat Punto. Designed as a simple 3D printed spare part.

Rating
0 / 5
Likes
2
Downloads
14
Makes
0
Views
88
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

This is a replacement hook/handle for the sunroof blind in a Fiat Punto. The part is used to attach and secure the sliding sunroof cover/blind in place.

It was designed as a practical spare part for repairing a broken or missing original element. The model is small, quick to print, and can help restore the proper function of the sunroof blind without needing to buy a complete replacement assembly.

The part should fit Fiat Punto models with a similar sunroof blind mounting system, but please compare the shape and dimensions with your original part before printing.

Recommended material: PETG, ABS, ASA or strong PLA
Layer height: 0.16–0.20 mm
Infill: 40–100%
Supports: Depends on orientation
Wall loops/perimeters: 3–5

Notes

  • Check the fit before final use.

  • Light sanding may be needed depending on your printer calibration.

  • For maximum strength, avoid printing the hook in an orientation where the layer lines can easily split under load.

  • This is a replacement 3D printed part, not an original Fiat component.

Tags