Replacement Accessory Box Flap for Kärcher OC 3 Mobile Outdoor Cleaner
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement flap/lid compatible with the accessory storage box of the Kärcher OC 3 Mobile Outdoor Cleaner.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 11
- Makes
- 0
- Views
- 42
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Intro
This is a replacement flap/lid compatible with the accessory storage box of the Kärcher OC 3 Mobile Outdoor Cleaner. The original flap is prone to breaking or getting lost over time — this 3D printable version restores full functionality to your device.
Disclaimer: This is an unofficial replacement part designed by a third party. I am not affiliated with, endorsed by, or sponsored by Kärcher. "Kärcher" and "OC 3" are trademarks of their respective owners and are used here solely to indicate compatibility.
Compatibility
Kärcher OC 3 Mobile Outdoor Cleaner
Kärcher OC 3 Plus (please verify dimensions before printing)
Recommended Print Settings
Since this part is used outdoors and exposed to water, UV light, and temperature changes, material choice matters.
Material (recommended - personal experience):
ASA — excellent UV and weather resistance (preferred for long-term outdoor use)
Print settings:
Layer height: 0.2 mm
Infill: 30–40%
Walls/perimeters: min. 4
Supports: needed only on the two places – under two small console mounts
Orientation: flat side down on the build plate
Nozzle temperature: per filament manufacturer's recommendation
Assembly
No additional hardware required. The flap simply snaps into place on the accessory box, matching the original mounting points.
Notes
Test-fit before printing multiple copies — minor tolerance adjustments may be needed depending on your printer's calibration.
Feel free to share photos of your prints in the "Makes" section!