Coax Cable Stripper for Neutrik NBNC75BLP9
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Custom 3D-printable coax cable stripping tool designed specifically for preparing cables for the Neutrik BNC connector
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 122
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Custom 3D-printable coax cable stripping tool designed specifically for preparing cables for the Neutrik NBNC75BLP9 connector.
The tool uses 3 small blade segments broken off from a standard utility knife.
Each blade is positioned at a different depth to create the required cuts for the connector preparation.
Designed cutting depths are optimized for:
Sommer Cable Vector 0.8/3.7 sw
Neutrik NBNC75BLP9
To use:
Insert the cable
Rotate the tool or the cable
The blades cut around the cable at the preset depths
Hardware Required
1× M4x40 countersunk screw (Senkkopf)
2× M4x30 screws
3× M4 nuts
Blade Installation
The blades are clamped into the printed parts.
If the blades are not held tightly enough, you can place a small piece of tape behind the blade to improve clamping.
For crimping the connector, I can recommend:
T3698A BNC coaxial crimping tool