Counting matching models…
Ein zweiteiliger Behälter mit aufklappbarem Deckel – vollständig druckbar, kein Hardware nötig. Features: Deckel auf integriertem Scharnier – kein Scharnier kaufen, einfach alles Drucken. Anschlag im Griff verhindert Überdrehnen des…
I printed it with Sunlu TPU 230°C
I recently bought a SDisk2 floppy emulator from myretrostore and it didn't come with a case, so I ended up designing one.
Cover for the SDI ports for the Atomos Shinobi SDI. Print with TPU
(DE) Einkaufswagen-Chip im “112 Feuerwehr ” Design, nicht nur für Feuerwehrleute! Passt optimal in den Einkaufswagen und lässt sich nach der Entnahme des Wagens sofort wieder aus dem Münzschlitz ziehen. Sehr sehr schneller Druck und trotz…
Its very easy to print. You dont need any supports. We wanted a system that is robust and easy to fix if something breaks. The converters sit in the pocket without play and can be pushed hard from the front without falling out. But it is…
I had a very common problem yet a very specific need. I converted my manual rolling shutters into electric ones using Avosdim solar conversion kit , but my installation was too tight and the rolling shutter blades would misalign…
Mounting a Blackmagic Design BiDirectional SDI Converter to a DAP 2HE 19" Rackmount . Combine with other available Parts for RasperryPi and others. Replace the existing M3 screws on the bottom with two M3x8 or better M3x9
Holds a Dtap F port and SDI port, a 15mm rod bracket screws into the back with ¼-20 bolts. Video section for this part starts at 2:20 in this video.
Made these modesl myself on tinkercad. PLEASE NOTE: You will need to buy longer screws! I bought a 50 pack on Amazon for about $6, search for these: M3 x 8mm Countersunk Flat Head Machine Screws One bracket is for the “top” side, and the…
Small side hook to attach the converter with a zip tie or a 1/4" screw to your camera. You will need two M3x8 screws to attach it. I printed them in PETG.
Small side hook to attach the distributor with a zip tie or a 1/4" screw to your camera. You will need two M3x8 screws to attach it. I printed them in PETG.
Needed a way to mount our Teradek Bolt 4K 12G-SDI 750 RX to the wall. I'm not sure if other Teradek products use the same bolt pattern. 25% infill 4 walls Rectilinear
IMPORTANT: There are many different Blackmagic micro converters all named very similarly. Please confirm that your unit's name matches verbatim to the model name! ~Blackmagicdesign Micro Converter SDI to HDMI 3G I made this model to mount…
IMPORTANT: There are many different Blackmagic micro converters all named very similarly. Please confirm that your unit's name matches verbatim to the model name! ~Blackmagicdesign Micro Converter BiDirectional SDI/HDMI 3G I made this…
A sparepart for Avosdim mosquito nets. Print in something UV resistant like f.e ASA.
Holder piece for the Blackmagic HDMI-SDI Micro Converter. The bottom side of the piece has a tripod mount screw socket . I used it with a cold shoe adapter to mount it on top of my camera. However, you can also connect it directly to a…
A replacement for the standard jog/shuttle handle. An exact replica of the original part.
Ich habe Filament von SUNLU verwendet. Druckbett lag bei 55 Grad. Habe die Supports angepasst in Richtung Baum Minimal. Schrägnaht ist aktiviert. 0,2mm HQ mit einer 0,04 Nozzle. Getestet mit Kobra S1 Combo und Kobra 3 V2 Combo. Enjoy! :)
I designed a Christmas diorama. Inside a box, moose and fir trees are arranged and the box is illuminated by a small string of lights. A special foil on the front creates a star effect. What you need: - Filament (I used wood PLA) - Effect…
These are brackets for DataPath VisionAV-SDI Model 199 capture cards that come from MediaSite R1040 Pro Recorders (or other such embedded systems) and therefore do not have PCI brackets by default. The 15 pin connector (VGA) daughter…
Housing for SDI over fiber converter with the rounded corners with the dimensions of 58mm x 82mm x 26mm
Model This is a power and SDI breakout for the Movi M10. It attaches to the rear of the camera plate of the Movi M10 using the double sided tape from the IMU. Print Settings I would recommend printing this with a quality filament and 4+…
You can find 2 versions: Like the original one, which is not strong enough for PETG A stronger version, which works great for PETG Print instruction PETG 100% infill Support required
This is essentially a Female BNC Connector that has an outer ring to protect the end of the connector from being crushed. The print on the picture has our company logo on it, but i've removed it from the model files.
Ein zweiteiliger Behälter mit aufklappbarem Deckel – vollständig druckbar, kein Hardware nötig. Features: Deckel auf integriertem Scharnier – kein Scharnier kaufen, einfach alles Drucken. Anschlag im Griff verhindert Überdrehnen des…
Magazine loader inserts for the Robins Tools magazine loader to work with the (apparently) smaller holes in the Lord Asdi magazines. Lengthened the inserts to extend through a 24mm magazine. Note this remix in ONLY the resized inserts for…
Support créé pour mes enfants qui avaient du mal a remettre les telecommandes sur les supports muraux d'origine.
Battery Connector replacement. Replaces the original contacts with easily available ones that come along Hailong 4-pin connectors. Fits the original battery holder with 8.0mm pin-to-pin pitch. You'll need to order Hailong connectors like…
Wolphaartsdijk is a small village located in Zeeland, Netherlands, its population is about 3,239 people as of 2026, their flag consist of a red griffin in a yellow background on green and white waters. The keychain was traced around the…
Bracket to keep din to SDI cables organized. Pigtails can be found here: DIN 1.0/2.3 Male to BNC Female 75 Ohm SDI Video Cable
I had to replace the encoder on an LX200GPS unit recently. The older version of the encoder offered by usdigital.com, E4, was no longer available so I had to use a newer version, E4P. They recommend using a spacer tool, and while it…
This is a mount for mounting the MiniConverter SDI distribution to a camera rig with standard mounting hardware. 2x m3 x 8mm screws are required to attach to the miniconverter, these replace the original two pz screws that hold the case…
Estes 2003 SDI Satellite Kit Nose Cone modded for printability Should be the original scale. separated into pieces and threading added. no support needed I print with 3 top 3 bottom 0.2mm layers 2 walls 5-10% infill (as light as you can…
Here's a little dinosaur that holds six Micro SD cards. Print instructions Instead of starting from scratch, I decided to remix my Stego-Storage USB holder. This time it's much smaller, a Micro-SD holder, and more like a Dimetrodon than a…
I/O Shield for Supermicro A2SDi-8C+-HLN4F in SC505-203B Chassis
thanks sdiplo for perfect design ( https://www.thingiverse.com/thing:2371694 ). I made little change to make it very easily printed. If the front side is flat has no impact to function, but big improvement for printing. Just few supports…
A tool for installing SDI Video cables with BNC connectors in tight spaces like on the back side of video equipment. The tool fits the standard Amphenol BNC connector and has a slot for the cable to go. Printed in Polymaker PolyLite PLA…
A SDI cable holder that sits on the top of a cubicle wall section. Three slots are for the “slim” 1855A SDI cable type, and three are for the more traditional 1694A cable. Printed in a Ender 3 v3 SE. 0.4mm nozzle 10% Gyroid infill 2…
This is a holder for the Blackmagic SDI converter. It´s meant to be on a camera tripod. The part has a space for the velcro to be used.
