SRAM AXS Battery Nose Repair / Replacement Tab
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Save your broken SRAM AXS battery!
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 26
- Makes
- 1
- Views
- 196
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Public Domain
Save your broken SRAM AXS battery! The fragile plastic nose that locks the battery into your derailleur or dropper post often breaks off, forcing an expensive replacement. This 3D-printed repair tab restores full functionality.
How it works: Simply grind off the remaining broken nose with a Dremel or file. Make the groove 1mm deep. The housing is ~2mm thick here. Then glue this printed replacement in place using super glue (cyanoacrylate). The side-mounted design provides superior structural strength compared to flat alternatives.
Tested with: PLA+ at 0.08mm layer height. PETG, ASA, or ABS recommended for maximum durability.
Compatible with all SRAM AXS batteries.