FLSun Super Racer Toolhead Upgrade

This toolhead uses the parts listed below with included link ( although when I purchased all of these I didn't get everything from Amazon at the time). Fusion file is included so that others can modify and improve! I didn't add part cooling nozzles because I figured that people may want different designs themselves and also depending on which hot end is used the nozzle may differ. 

The Effector Plate must be modified to make this work the change needed is shown in the pictures. 

Screws Holding the Hubs together are M3 SHCS minimum length is 16mm but you can go up to 25 mm for the length. Hotend Fan is held in by M2.5x16mm screws. EBB36 Gen 2 uses M3x6mm SHCS and the Hub is held on the effector plate with M3x10mm Screws. 3mm Heat set inserts are used to hold most of it together  (ref pictures) 

The CPAP hose attahment is meant for 15mm diameter hose.

Big Tree Tech EBB36 Gen 2: https://amzn.to/4fQT7yP

Sherpa Micro Extruder: https://amzn.to/49KDNjf

Siraya Tech ASA-GF Filament ( Filament I used for this ): https://amzn.to/4oiCJcq

Polymer ASA Filament Black : https://amzn.to/4xftSvZ

2510 Heatbreak Fan: https://amzn.to/4uS9YFS

Biqu Universal Turbo Kit for CPAP: https://amzn.to/4uS9YFS

CPAP Hose: https://amzn.to/4oiOmjJ

Phaetus Dragon UHF Hotend: https://amzn.to/4v59ZXm

Replacement FLSun Super Racer Effector Plate: https://amzn.to/4e5l4QI

M3 Screw Kit: https://amzn.to/4ecJSX8

M2.5 Screw Kit: https://amzn.to/49JqSOz

M3 Heatset Inserts: https://amzn.to/3QrgCnC

(I participate in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for creators to earn fees by linking to Amazon.com and affiliated sites. Some links associated with this project may earn me a small commission at no additional cost to you.)