7 Inch Touch Screen 1024x600 IPS LCD - Frame and Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Based on the model by Yan1ALAN_2918498 - remixed to fit a similar screen with a different mounting pattern.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 63
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
Removed carrying handle and legs to make printing the frame easier; legs provided as separate object and can be adhered with CA glue (or left off entirely).
Scaled model to accommodate 7-inch screen with the mounting holes on the tabs (since that's what my screen has, for some reason).
Also included printable standoffs and a mounting plate for the Raspberry Pi mounting holes on the back, and cut a large portion of the back plate off to save material and enable RPi mounting.
Screen mounted via 20mm M3 bolts.
Example screen that the case was remixed to fit: HERE
Original model: HERE
Raspberry Pi mount plate: HERE
Printed 0.2 layer height; 2/5/3 walls/top/bottom; 15% grid infill