Repair USB-C Connector Housing DELL WD19/WD15
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacing the lost housing of the USB-C connector of the DELL WD19/WD15 docking station
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 64
- Makes
- 1
- Views
- 276
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
## Print settings:
Material: PETG
- Layer height: 0.2 mm
- Perimeters: 4
- Top/bottom layers: 10
Cuttings of transparent PETG can be inserted into the holes for the LEDs.
Assembly does not require glue, but you can apply a little glue to the pins to be on the safe side. And press the housing tightly onto the connector.
The update added a file with a large hole for the light guide so that there is no need to drill it out.
If this helped you, you can buy me a coffee: https://ko-fi.com/maxpi
Or use my referral @MaxPi when purchasing a Prusa printer — you'll get Prusameters and a free spool of filament, and so will I 🙂