Sovol SV08 Reverse Spool Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounts the stock spool holder backwards to allow the printer to sit directly up against other machines or walls.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 61
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This model allows you to mount the stock spool holder backwards, so that it tilts in over the top of the machine instead of out to the side. This allows other machines or walls to be right up against the printer without blocking the runout sensor.
This mod is not currently compatible with the enclosure for this machine, but could be adjusted to work with printed top hats. STEP file is included below to help with remixes.
Part uses less than 12g of filament according to the slicer. Recommended settings below (Voron standard).
4 walls
5 top and bottom layers
40% Gyroid, Grid, Honeycomb, Triangle or Cubic infill
0.2 layer height
Material - ABS, ASA or PETG. Do not use PLA or it may bend over time under the weight of the spool.
Required Additional Hardware:
M4x12 socket head cap screws - x2
M4x6x6 heat set inserts - x2
The two original screws from the spool holder