LayersFactory
Report model
1 / 3
OpenDragy - Open-Source High-Precision 10Hz GPS Performance Timer — image 1
1 / 3

OpenDragy - Open-Source High-Precision 10Hz GPS Performance Timer

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Félix

@Felix_5025352

Official enclosure for OpenDragy, the open-source 10Hz GPS vehicle performance timer.

Rating
5 / 5
Likes
3
Downloads
6
Makes
1
Views
80
Reviews
1

Updated at source:

Model information

Source
Printables
Category
Automotive
License
Creative Commons — Attribution — Noncommercial — Share Alike
DetailsFiles (3)Makes & comments (Makes: 1) (Comments: 1)Remixes (1)Collections (2)Related

Pushing the boundaries of performance.

This is the official 3D printable enclosure for OpenDragy, an open-source vehicle performance timer. Pair this hardware with our completely free Flutter companion app to track a variety of tests with incredible precision.

OpenDragy utilizes high-rate 10Hz binary u-blox GPS telemetry, a 100Hz IMU accelerometer, and zero-crossing interpolation to give you millisecond-level accuracy that rivals commercial performance timers.

✨ Features of OpenDragy

  • High-Precision 10Hz GPS: Reads binary u-blox navigation packets 10 times per second directly from the GPS chipset for pinpoint speed and position tracking.

  • Real-Time G-Force Logging: Streams live 100Hz accelerometer data directly to the companion app for instant G-force mapping and acceleration curves.

  • Zero-Crossing Interpolation: Interpolates exact launch times down to the millisecond.

  • Auto-Armed Launch: Automatically starts recording when you hit 3.0 km/h, bypassing GPS drift.

  • Fleet Management & Analytics: Manage vehicle profiles and view interactive slope, elevation, and G-force charts in the app.

🛠 Hardware Required (BOM)

To build this, you will need the following off-the-shelf electronics:

  • ESP32-S3 Mini Development Board

  • QUESCAN G10A-F30 UBX M10 GPS Module

  • BMI160 Accelerometer/Gyroscope IMU Module

  • Magnets: 4x 10x3mm Neodymium disc magnets (for enclosure and mounting base)

  • Fasteners: 4x M3x8mm screws and 2x M3x4mm screws

  • Adhesive: Double-sided mounting tape (VHB) for securing the magnetic base to your dashboard

🔗 Links & Firmware

Print Instructions / Settings

  • Material: ASA (Highly recommended to withstand high temperatures on a hot car dashboard!)

  • Layer Height: 0.2mm

  • Infill: 20%

  • Wall Loops (Perimeters): 3

Tags

caresp32racingperformanceautomotivetrackergpstelemetry