Dual-Hose Adapter for Portable Air Conditioners
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
150mm Dual-Hose AC Adapter – separate HOT exhaust & COLD intake from different directions
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 35
- Makes
- 0
- Views
- 518
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Dual-Hose Adapter for Portable Air Conditioners
A robust dual-hose adapter to attach two standard 150mm (15cm) AC hoses to a wall or to a wooden board mounted at your window. Unlike a single-hose setup, this version routes warm exhaust and cool intake air completely separately — each drawn in and expelled from a different direction. Ideal for a clean, fixed, and more efficient installation of your portable / mobile air conditioner instead of just hanging the hose out of an open window.
Features
Two separate ports for warm exhaust and cool intake air
Hot and cold airflow routed from different directions — no short-circuit airflow, no negative room pressure
Fits all common 150mm air conditioner hoses
Mounts flat to a wall or wooden window board
Sturdy, durable design for everyday use
Screw holes for secure fastening
Print Settings
Supports: REQUIRED
Material: PETG-CF or ASA/ABS (mandatory for heat resistance near the warm exhaust air)
Infill: 30–40% for good strength
Walls/Perimeters: 3–4 for extra durability
Layer height: 0.2mm
Notes
PLA is not recommended, since the exhaust air gets warm and may deform low-temperature materials over time. PETG-CF, ASA or ABS handle the heat much better and give a long-lasting, stable mount. For ASA/ABS, a printer enclosure is recommended to avoid warping. Mount it to a wall or a wooden board at the window, connect both 150mm hoses, and enjoy a tidy, efficient dual-hose air conditioner setup. If you like this model, a like, comment or photo of your print is always appreciated!