1 / 9
Pool Hose Adapter - male-male pool hose adapters with a working snap-together swivel — image 1
1 / 9

Pool Hose Adapter - male-male pool hose adapters with a working snap-together swivel

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

37.6 mm (~1.48") and 42.0 mm (~1.65") male-male swivel adapters

Rating
0 / 5
Likes
2
Downloads
11
Makes
0
Views
88
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

Update — thicker ribs + CAD/profile pack

Hose retention ribs increased to 0.8 mm for a firmer bite (was 0.4 mm). Also added STEP files for all four parts, pooladapters.3mf print profile, and v2 preview photos. Spigot/collar 37 + 42 sizes unchanged in role; any spigot still mates with any collar.

Printed in PETG - I used brims, no supports. Orient as below.

Sizes (metric + imperial)

Four parts - any spigot mates with any collar:

  • spigot_37 / collar_37 - hose-end OD 37.6 mm (~1.48 in); bore 33.6 mm (~1.32 in). Targets ~1-1/2" / 38 mm-class hose ID with rib bite.

  • - spigot_42 / collar_42 - hose-end OD 42.0 mm (~1.65 in); bore 38.0 mm (~1.50 in).

Combinations:

  • 37-37 (37.6 mm / ~1.48") = spigot_37 + collar_37

  • - 42-42 (42.0 mm / ~1.65") = spigot_42 + collar_42

  • - 37-42 reducer = mix across sizes

Retention ribs: 0.8 mm (~0.031 in).

Combinations

37–37 = spigot_37 + collar_37

42–42 = spigot_42 + collar_42 ·

37–42 reducer = spigot_37 + collar_42 (or the reverse pairing).

Assembly

Place the collar half mouth-up on the bench, press the spigot's stub into it with one firm push — expect real resistance (it's a ~1% interference snap; a palm strike is within normal range). It clicks over the 0.25 mm retention bead and then spins freely. The joint is permanent (destructive to remove) and unsealed, same as the original part.

Add Teflon tape if you want a tighter fit

Tags