1 / 5
Bumper Feet (Adafruit Aluminum Feet Alternative) — image 1
1 / 5

Bumper Feet (Adafruit Aluminum Feet Alternative)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

3D printable alternative to Adafruit Aluminum Bumper Feet (22x11mm). Pauses mid-print to encapsulate an M4 hex nut.

Rating
0 / 5
Likes
0
Downloads
3
Makes
0
Views
15
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Share Alike

This is a drop-in 3D printable replacement for the Adafruit Anodized Aluminum Bumper Feet. Measuring approximately 22mm in diameter and 11mm tall, these bumpers are ideal for elevating and supporting DIY electronics, custom cases, and other hardware projects.

To provide strong mounting threads without relying on plastic tapping or heat-set inserts, this model encapsulates a standard M4 hex nut entirely inside the print. You simply pause the print, drop the nut into the cavity, and let the printer seal it inside.

Hardware Required (Per Bumper)
  • 1x Standard M4 hex nut

  • 1x Self-adhesive rubber foot (8mm x 3mm)

    • Reference link: 8mm x 3mm Clear Rubber Feet on Amazon

    • (Note: I sourced my hardware locally so I haven't purchased from this exact Amazon listing, but it shows the exact style and dimensions you need).

Print Settings
  • Material: PLA, PETG, or ABS/ASA

  • Layer Height: 0.2mm

  • Walls/Perimeters: 3

  • Infill: 15%

  • Supports: None

How to Embed the Nut (Pause at Height)
  1. Slice the model in your slicer (PrusaSlicer, Orca Slicer, Bambu Studio, Cura, etc.).

  2. Use the layer slider in the preview tab to find the exact layer where the hex cavity finishes, right before the slicer begins printing the solid layers over the hole.

  3. Insert a Pause command at this specific layer.

  4. Start the print. When the printer pauses and moves the toolhead aside, drop the M4 hex nut into the cavity.


  5. Important: Ensure the nut sits completely flush or slightly below the plastic surface so the nozzle does not strike it when resuming.

  6. Resume the print. The printer will bridge over the nut, sealing it permanently inside the bumper. Apply the 8x3mm adhesive rubber foot to the top cavity once finished.

Tags