FilaScan - A Handheld NFC Reader & Writer for FilaMan
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Handheld NFC Reader & Writer for FilaMan
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 6
- Makes
- 0
- Views
- 74
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A complete redesign of the original "NFC-only mode" FilaMan NFC reader/writer (aka. FilaLite).
I wanted to have a portable handheld device running on battery with a smaller form factor.
It currently runs the original firmware, but I may consider to create a dedicated and optimized firmware for it.
Parts I would like to change in the future:
Faster startup time (optimize and no load cell detection)
More reliable operation in general
Show battery state of charge
May add a acoustic feedback on successful scan
May add a button to trigger a scan
Use the original documentation for the wiring:
https://github.com/Fire-Devils/FilaMan-System-ESP32/blob/main/docs/NFC-only_mode_en.md
The only difference is the VIN/GND coming from the battery module (s. below for details).
You may are also interested in some of my other NFC related models:
Support my work
For non-Prusa parts and filaments, check out 3DJake (International, UK, Germany, France).
I'll get a small cut of any order you fulfill using these links (at no additional cost for you 😉).
To support my work directly, you can buy me a coffee.
If you want to order a Prusa printer and earn some Prusameters (I will also get some), you can use my referral code "@Whity" at checkout or click one of the following links
(the code only works for the first order of each printer model):
| CORE One | CORE One Kit | MK4 | MK4 Kit | MINI+ | MINI+ Kit | XL | SL1S | SL1S+CW1S |
Planning to buy a professional fiber or UV laser? Check out ComMarker and get a discount on your first order (must be a new account and the first order placed within 30d. Referral code is part of the link).
Also check out my other models.
Parts used

Important: Ensure you select the correct version of each of the parts:
18650 Battery Cell
Screws:
4-8x M3 * 6 mm
4x M3 * 16 mm
4x M3 * 30 mm
4x M2.5 * 4 mm
Assembly
Flash the ESP32 with the original firmware first using the Web Flasher (there is no hole to plug in an USB cable after assembly.
Ensure the switches of the PN532 are set correct:

Solder some cables to the battery module. The two solder pads in the middle can be used to turn the output on and off.

Screw in the battery module (two screws are enough) and solder on the switch:


Solder on two wires to the output, one pair will go to the ESP32, the other one to the PN532:

Wire the rest as describe in the original documentation.




