Quick Print Magnetic Photo Frame - 3x3 - Kodak C300R
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple magnetic photo frame for the 3"x3" photos from a Kodak C300R camera designed to use D6x2mm magnets
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 8
- Makes
- 0
- Views
- 50
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Sleek Magnetic Photo Frame
Display your favorite photos in style with this clean and minimal magnetic photo frame! Perfect for sticking onto the fridge, magnetic whiteboards, filing cabinets, or any metallic surface.
Designed for quick printing and simple assembly, this frame features magnet pockets and pairs amazingly with holographic or textured build plates for an eye-catching finish.
Features
Customizable Hold: Designed with pockets for up to six D6x2mm magnets—use a minimum of 4 magnets (one in each corner) for a solid hold, or load all 6 for extra mounting strength!
Holographic Ready: Print face-down on a textured, starry, or light-diffracting holographic build plate to transfer brilliant patterns right onto the front!
Minimalist Design: Clean edges that frame your memories
Additional Hardware Required
4–6x D6x2mm Round Neodymium Magnets
Super glue / CA glue (to secure magnets into their recessed pockets)
Recommended Print Settings
Setting | Recommendation |
Supports | On (Buildplate Only) |
Walls / Perimeters | 2 |
Infill Density | 15% (Dealer's Choice) |
Infill Pattern | Gyroid (Recommended, but open to preference) |
Orientation | Print face-down for best surface quality and plate effect transfer |