Paramotor Throttle with cruise control. Dual start version. By Twisted Risers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Twisted Risers throttle dual start version. After lots of requests for a dual start version here it is. Two finger…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 47
- Makes
- 0
- Views
- 419
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial
Twisted Risers throttle dual start version.
After lots of requests for a dual start version here it is.
Two finger throttle for paramotor. You will require:
2 off 7mm OD 4mm ID bearings for the lever https://www.amazon.co.uk/sourcing-map-MR74-2RS-Groove-Bearings/dp/B082PS4RVW/ref=sr_1_2?keywords=7mm+od+4mm+id+bearing&qid=1581350946&s=diy&sr=1-2
2 off 12mm SPST buttons for start and engine kill switch suggest red and green. https://www.amazon.co.uk/sourcingmap-Black-Momentary-Button-Switch/dp/B07FRYDCZ5/ref=sr_1_21?crid=OM750YN1ROZW&keywords=12mm+SPST+button&qid=1647092357&sprefix=12mm+spst+button%2Caps%2C70&sr=8-21
Screws / washers etc. If you fly paramotors you will figure it out.
Use your exsisting cables or buy new.
Para-Norman PPG did a great video on it here:
If you do not have a 3d printer can i suggest you contact Kyle Davies at the links below. He can print the parts for you with a percentage of the cost going to UK Alzheimers charity.
Website
Para-Normalppg.com
Facebook https://www.facebook.com/ParaNormalPPG
Ebay https://ebay.co.uk/usr/para-normalppg
Print Settings
Printer Brand:
TEVO
Printer:
Tornado
Rafts:
No
Supports:
Yes
Resolution:
.28
Infill:
70%
Filament: 3D-Printz PETG black
Notes:
You can print this with PLA but please be aware PLA is broken down by UV in the sunlight and will turn brittle.
Category: Sport & Outdoors