CREALITY K1 | K1C | K1SE - LID RISER V3 [FRAME EXTENSION KIT]

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Want to stay updated on new projects and updates? Join https:// patreon.com/LEOTE_approach for free!

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
102
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

LID RISER V3 [FRAME EXTENSION KIT] | Vents | Filament Sensor |

LED Strip | Hinges | Embedded LID

*If you have any issues with printing or assembly, feel free to message me, and

I'll do my best to assist you 😉.

*Because of the seam inside the walls, the internal space is reduced. To

clean it up, use scissors or a similar tool. Simply insert the scissors into the

wall and go back and forth a few times until it feels cleaner and there’s no

more resistance. This will ensure the vents will slide.

*If it's difficult to slide the pieces together, use a metal file to clean the

rails, especially on the wall pieces. This minor adjustment can make a big

LEOTE [approach]

CREALITY K1 | K1C |

K1SE - LID RISER

V3 [FRAME

EXTENSION KIT]

VIEW IN BROWSER

updated 3. 9. 2025 | published 3. 9. 2025

3D MODEL ONLY

difference. The fit is meant to be snug, so the pieces aren't loose. I had to

do this with some of my pieces. Some fit perfectly, while others were tight,

likely due to the printing process. Just file the rails a few times, and they

should fit perfectly.

/////FOR THE K1SE

The K1SE frame does not include the 4 threaded holes in the corners,

so the riser cannot be mounted in the usual way. Dennis Mckinney

created this solution, which I’m sharing here.

https://www.printables.com/model/1379103-creality-k1-se-lid-riserretainer-

clip

______________________________________________________________________________________________________________

/////LINKS FOR THE HARDWARE USED IN ALL MY PROJECTS * affiliate

links

INSERTS M3 x 4mm (L) x 5mm (D): https://amzn.to/3EovAVw

HEX SOCKET CAP M3 6mm-30mm (STAINLESS): https://amzn.to/

4imGAQW

HEX SOCKET CAP M3 6-20mm (BLACK): https://amzn.to/3R7wjx4

FLAT HEAD SOCKET CAP M3 4mm-12mm (STAINLESS): https://

amzn.to/3G3Z1wr

FLAT HEAD SOCKET CAP M3 8mm-25mm (BLACK): https://amzn.to/

43JeThP

FLAT HEAD SOCKET CAP M3 6mm-16mm (BLACK): https://amzn.to/

4kRgQNP

LED STRIP - COB LED Strip Lights Daylight 24V: https://amzn.to/

44M0iTd

LED CONNECTOR - JST-XH 2.54mm 1S 2 Pin Balance Plug: https://

amzn.to/3YrGG2C

________________________________________________________________________________________________________________

UPDATE 0.9 15/07/2025 - GUIDE UPDATED WITH THE BOM LIST FOR

CFS MOUNT V1 AND V2 VERSIONS

•

UPDATE 0.8 26/06/2025 - NEW TEST PARTS FOLDER

These parts were created to test the most critical fit between components

before printing the full model.

Start by printing just two test pieces and check if they snap together

correctly.

Confirm key dimensions and adjust your slicer scaling if material

shrinkage is affecting the fit.

Once everything looks good, print the remaining test pieces to be

sure your printer is dialled in.

If the vents do not slide properly into the wall, even when the size is

correct, there might be small bits of plastic left inside the channel from

overhangs or bridges.

To fix it, use a metal tool like a closed pair of scissors and run it through

the slot from end to end.

Keep doing this until the path is clean and the tool moves freely. That

should restore smooth movement.

UPDATE 0.7 09/06/2025 - NEW VENTS VERSION – CFS COMPATIBLE

FOLDER - VENTS_VERSION - CFS COMPATIBLE

FILE - [c]_x4_K1C_V3_VENTS_CFS_VERSION.STL

This updated part was designed for users who have the CFS system

installed on their K1, K1C, or K1SE.

When the CFS is mounted, the printer loses about 5 mm of travel on the Y

axis. That means even if the original vents part fits on the build plate in

the slicer, it will fail during printing because of that shift.

To fix this, I created a shorter version that stays within the usable print

area.

The original design had a wider side flange, which helped seal the riser

more effectively. Since that width is no longer possible with the CFS in

place, this new version keeps just enough material to maintain a proper

seal for materials like ASA or ABS.

[c]_x4_K1C_V3_VENTS_CFS_VERSION

UPDATE 0.7 16/05/2025 - NEW BACK WALL with FILAMENT SENSOR

INVERTED

This version allows you to install the filament sensor upside down.

The sensor is not directional, so it works the same way when inverted.

With this configuration, the cable connector is positioned at the bottom,

which means you can use a much shorter cable.

•

•

•

/////PARTS LIST FOR PRINTING THE RISER WITH THE CFS MOUNT V1

EXCLUDED PARTS:

LID

BACK FRAME - [a]_x1_K1C_V3_FRAME_BACK.stl

FRONT FRAME - [a]_x1_K1C_V3_FRAME_FRONT.stl

BACK WALL- [b]_x1_K1C_V3_WALL_BACK.stl

FRONT WALL - [b]_x1_K1C_V3_WALL_FRONT.stl

1x LEFT WALL CORNER - [b]_x4_K1C_V3_WALL_CORNER_L.stl

RIGHT WALL CORNER -

[b]_x1_K1C_V3_WALL_CORNER_R_PTFETUBE_HOLE.stl

HINGES - [c]_x1_K1C_V3_LEFT_HINGE.stl -

[c]_x1_K1C_V3_RIGHT_HINGE.stl

HANDLE - [c]_x1_K1C_V3_HANDLE.stl

LID CLOSER - [b]_x1_K1C_V3_LID_CLOSER.stl

FILAMENT SENSOR SPACER -

[b]_x4_K1C_V3_FILAMENT_SENSOR_3mm_SPACER.stl

NEW PARTS TO PRINT:

2x SIDE FRAME – [a]_x2_K1C_V3_FRAME_SIDE.stl

•

•

•

•

•

•

•

•

•

•

•

•

1x SIDE WALL - b]_x2_K1C_V3_WALL_SIDE

1x RIGHT WALL CORNER - [b]_x3_K1C_V3_WALL_CORNER_R.stl

1x UPDATED BACK WALL – CFS_MOUNT_KIT FOLDER

1x UPDATE LEFT WALL CORNER – CFS_MOUNT_KIT FOLDER

/////PARTS LIST FOR PRINTING THE RISER WITH THE CFS MOUNT V2

EXCLUDED PARTS:

BACK WALL- [b]_x1_K1C_V3_WALL_BACK.stl

1x LEFT WALL CORNER - [b]_x4_K1C_V3_WALL_CORNER_L.stl

RIGHT WALL CORNER -

[b]_x1_K1C_V3_WALL_CORNER_R_PTFETUBE_HOLE.stl

FILAMENT SENSOR SPACER -

[b]_x4_K1C_V3_FILAMENT_SENSOR_3mm_SPACER.stl

NEW PARTS TO PRINT:

1x UPDATED BACK WALL – CFS_MOUNT_KIT FOLDER

1x UPDATE LEFT WALL CORNER – CFS_MOUNT_KIT FOLDER

1x RIGHT WALL CORNER - [b]_x3_K1C_V3_WALL_CORNER_R.stl

_______________________________________________________________________________________________________________

*INSTALLANTION INFO - FILAMENT SENSOR CABLE

If you’re having trouble connecting the filament sensor because the cable

is too short, start by removing the printer’s bottom cover and cutting the

zip ties holding the cable in place. If it’s still too short, it’s likely glued

inside the raceway. In that case, you’ll need to remove the entire cable

cover and carefully free it from the superglue.

UPDATE 0.6 30/01/2025 - New Chain Wall

In this new version, the vents on the inside of the wall have been partially

closed to eliminate the noise that occurs when the chain rubs against

them during operation.

•

•

•

•

•

•

•

•

•

•

•

UPDATE 0.5 19/12/2024 - New closed wall versionUPDATE

0.4 | 22/11/2024 - Filament sensor wires

To get more slack for the sensor wires, you just need to remove the bottom

cover and cut the two (usually) zip ties holding the wires in place, and

you’ll have enough slack.

UPDATE 0.3 | 03/09/2024 - Material quantity by color

[a] - Polymaker PolyLite ABS Galaxy Dark Grey - 128.39g

[b] - Polymaker PolyLite ABS Black - 383.06g

[c] - Polymaker PolyLite ABS Green - 83.1g

UPDATE 0.2 | 14/08/24

Check this video for fine-tuning filament settings and dimensional

accuracy:

If the sensor cable is too short and you can't connect it to the sensor,

you'll need to remove the bottom cover of the printer, and you’ll see

some zip ties holding the cable in place.

•

UPDATE 0.1 | 26|07|2024 - The project is complete

Below is the list of updated files, including a new file.

LIST OF UPDATED FILES:

[b]_x1_K1C_V3_WALL_CORNER_R_PTFETUBE_HOLE

[c]_x1_K1C_V3_HANDLE

[c]_x1_K1C_V3_LEFT_HINGE

[c]_x1_K1C_V3_RIGHT_HINGE

[c]_x4_K1C_V3_VENTS

NEW FILES:

[b]_x4_K1C_V3_FILAMENT_SENSOR_3mm_SPACER

*Apply these spacers with the filament sensor to distance it from the LEDs

_____________________________________________________________________________________

NEW INSERTS

The inserts have been updated. The 5mm inserts left marks on the frame's

exterior, so please use the new 4mm inserts instead.

Link to new inserts: https://amzn.to/42NE3e2

SLIDING

For smooth sliding like in the video, use scissors or a metal object that fits

inside the walls. Move it back and forth several times. This will clean up

the internal overhangs that cause the slider to not move smoothly.

RISER FEATURES:

MOUNTING SYSTEM: The parts are secured together with bolts and

inserts. The only glued part is the flap that closes the cut-out on the

back of the LID.

•

VENTILATION: It has 360° ventilation, the highest ventilation I have

ever designed in a riser.

EMBED LID: The LID is embedded in the frame, giving a cleaner

look. Despite being embedded in the frame, the usable space inside

the printer is the same as the V2 50mm [another of my projects].

HINGES: The hinges open 110° (allowing printing with the LID open)

and have an inner flap that ensures alignment of the LID with the

frame.

HANDLE: It has a handle (press-fit, but I have a version with a fixing

tab for the LID if needed in the future).

LIGHTING UPGRADE: There is a predefined space for an LED strip.

One of the inner corners has a fixation point for the wires if LEDs are

installed.

FILAMENT SENSOR REPOSITIONING: Fixation points on the back

wall to place the filament sensor inside the riser. One of the side wall

parts has a hole for the PTFE tube.

CHAIN ADJUSTMENT: Mounting points on the back wall for the piece

that allows adjusting the chain height.

/////THINGS to ADD

Front Chain Riser (12mm) - LINK

////ATTENTION

Make sure the bolts aren't too long. They shouldn't go past the

frame's thickness to avoid damaging any internal components. [ The

bolts listed have been tested ]

/////IMPORTANT

Before starting the print of the riser, I recommend printing this tool

https://www.printables.com/model/899470-xyz-accuracy-testcalibration-

tool to test the dimensional accuracy of your printers.

Use this tool https://www.printables.com/model/480907-shrinkagecalculator-

dimensional-calibration-tool to determine the correct scale

based on the filament shrinkage you’ll be using.

The riser pieces were developed with very tight tolerances (0.2mm)

to ensure proper alignment and functionality of the assembly, so it’s

important to make sure everything is well-calibrated or that you

understand what is needed for everything to work correctly.

///// ASSEMBLY GUIDE

Scroll to the bottom of the download page to find the installation

guide.

•

•

•

•

•

•

•

•

•

•

•

•

•

Model files

/////All files are labeled with material/color and quantity

[a] - ABS or similar material | Color 1

[b] - ABS or similar material | Color 2

[c] - ABS or similar material | Color 3

[ The vents [c] can be printed in a different material - PLA ]

[ Do not print the hinges and the chain adjustment piece in PLA - use a

more heat-resistant material ]

x(number) - number of parts to print

Tags