1 / 2
Menards Patriot Lighting Solar / Tiki Torch Pole Barrel Connector Replacement — image 1
1 / 2

Menards Patriot Lighting Solar / Tiki Torch Pole Barrel Connector Replacement

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replacement barrel connector joining the three sections of a Menards Patriot Lighting Solar/Tiki Torch pole, plus repair

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
18
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

A replacement barrel connector for the three-piece pole assembly used on Menards Patriot Lighting Solar Torch / Tiki Torch outdoor lights.

The original torch pole consists of three sections, with each section joined to the next by a small barrel connector. One of my torches was knocked over during a storm, and the impact broke one of those connectors.

The pole sections themselves were fine, so I measured the original barrel connector and modeled a replacement. This part replaces the connector only; it does not replace any of the three pole sections.

This model also includes a 3D-printed dowel that may be useful for repairing an original barrel connector that has cracked or broken. The dowel is intended to fit down the center of the original connector and provide additional support.

Important: There appears to be a restriction inside the original barrel connector near its center. Do not force the printed dowel through the original part. Depending on the condition of the original connector, forcing the dowel into place could cause it to crack. If the dowel does not slide into place with reasonable resistance, use the replacement barrel connector instead or drill out the restriction with an appropriate sized bit.

The replacement connector is intended to join the existing sections of the original three-piece torch pole.

This is an independently designed replacement part and is not an official Menards or Patriot Lighting product. Created in TinkerCad

I printed the parts in PETG for outdoor use.

Print Settings

  • Material: PETG

  • Print Orientation: Horizontal — print the barrel connector lying on its side

  • Perimeters: 4

  • Infill: 30%

  • Infill Pattern: Gyroid

  • Perimeter Generator: Classic

  • Supports: Automatic/painted

  • Support Style: Organic

  • Top Interface: Light

  • Branch Density: 20%

Important: Print the barrel connector horizontally for maximum strength. The orientation is intentional and helps put the printed layers in a more favorable direction for the stresses placed on the connector during assembly and use.

Included Parts

  • Replacement barrel connector — replaces the original connector joining sections of the three-piece pole.

  • Repair dowel — optional part that may be used to reinforce an original connector if it fits without excessive force.

Why I Made This

A storm knocked one of my Patriot Lighting solar tiki torches over and broke one of the barrel connectors joining the three sections of the pole. The pole sections themselves were perfectly fine.

I initially considered reinforcing the original connector with a printed dowel. However, examination of the original part revealed a restriction near its center that could make inserting the dowel difficult. Forcing it through could crack the original connector, which rather defeats the purpose of repairing it.

So I modeled a replacement barrel connector instead, and included the dowel as an additional option for anyone who wants to see whether the original connector on their torch can be repaired.

Sometimes it's the tiny, oddly specific plastic part that decides whether something gets thrown away. This one doesn't have to.

Tags