1 / 4
Prusa CORE One Magnetic Exhaust Adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made for 75mm diameter extraction hose.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 4
- Makes
- 0
- Views
- 111
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple way to connect my CORE One to a centralized air extraction system.
BOM | Q.ty |
Ø6x3mm Neodymium Magnet | 10x |
Glue (for the magnets, I used Cyanoacrylate) | Little |
Blue Painter's Tape (Gasket) | Little |
Made for Ø75mm flexible hose;
See pics for tape application, it works as a basic gasket;
The notches protruding from the printer's frame go into the adapter for alignment;
Print out of PETG or better. I used ASA.
Tags
prusaadapterventilationventhoseexhaustventedadaptershoseadapterventilatorexhaustfanventilationsystemhoseconnectorhosesventsexhaustductventilhoseholderventilatedexhaustgrillventcoveradapterhoseexhausthoseexhausthoseflangeexhausthosemountventiladorexhaustmanifoldhosepipeventilationgrillexhaustventhoseattachmenthosecoupleradaptermountexhaustcoverexhaustadapterexhaustfilterprusacoreonecoreoneprusacoreprusacore1coreonemodcoreoneventcoreoneupgradecoreonemodscoreoneindxcoreoneplusprusacoreoneplusprusacore1plusprusacoreonemodscoreoneskin