Magnetic Phone Mount for Dacia Sandero III (2021-2026) - Air Vent Clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnetic Phone Mount that clips into the air vent of a Dacia Sandero III (2021-2026).
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 41
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Magnetic Phone Mount that clips into the air vent of a Dacia Sandero III (2021-2026).
A magnetic pad for your phone. Takes a single N52 disc 20x3 mm, glued into the recess on the back - so the magnet sits close to the phone and the grip is strong.
You need: one neodymium disc 20x3 mm N52 and a steel plate on the phone (or a MagSafe-compatible case).
FITMENT
This car has rectangular vents with HORIZONTAL blades, so the clip is the sprung-jaw type: it grips a blade 1.2-3.2 mm thick and up to 16 mm deep, with friction teeth inside the jaws.
The jaw is deliberately sprung rather than a fixed slot, because real vent blades vary between cars and even between the left and right vent of the same dashboard. If it ends up tight, it is meant to be - it holds by friction and should need a firm push.
MATERIAL - THIS ONE MATTERS
Print in PETG or ASA. Not PLA. A parked car in the sun goes past 60-70 C inside, and PLA starts to soften around 55 - a PLA clip will sag off the vent, taking whatever it was holding with it. This is not a preference, it is the condition for the part working at all.
Settings: 0.2 mm layers, 4 perimeters, 30% infill, no supports. Print as oriented - the whole part is one extruded profile lying on a flat face, and the spring jaw bends in the plane of the layers, which is the only orientation that survives repeated clipping.
Not affiliated with, endorsed by, or connected to any vehicle manufacturer. Brand and model names describe fitment only.
