1 / 4
Floating Corner Shelf for Toilet Brush / Bathroom Organizer — image 1
1 / 4

Floating Corner Shelf for Toilet Brush / Bathroom Organizer

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Minimalist Corner Floating Shelf for Toilet Brush / Bathroom Organizer

Rating
0 / 5
Likes
1
Downloads
1
Makes
0
Views
38
Reviews
0

Updated at source:

Model information

Category
Bathroom
License
Creative Commons — Attribution — Noncommercial — Share Alike

Minimalist Corner Floating Shelf for Toilet Brush / Bathroom Organizer

A clean, floating corner shelf designed to keep your toilet brush holder, soap dispenser, or bathroom essentials off the floor for effortless mopping and a tidy look.

Featuring a round platform with a raised rim and an angled corner backplate, it slots precisely into 90° tiled wall corners without wobbling.

Key Features

  • Cleaner Bathroom Floors: Elevates the brush canister off the floor, making floor cleaning and mopping quick and hassle-free.

  • Spill & Slide Protection: Raised outer lip/rim keeps the container safely centered and prevents it from slipping off.

  • Damage-Free Mounting: No drilling required! Designed with flat contact wings on the backplate for double-sided tape.

  • Silicone Joint Clearance: Angled rear corner accommodates standard bathroom silicone beads and grout lines smoothly.

  • Platform Size: Comfortably fits round brush holders and bottles up to ~138 mm (14 cm) base diameter.

⚠ Important: Mounting & Tape Recommendation

Because this shelf holds weight cantilevered in a humid bathroom environment, the quality of your double-sided tape is crucial:

  • Use Heavy-Duty Tape: Do not use cheap foam tapes or standard poster strips. We strongly recommend high-strength, waterproof tape such as 3M VHB, Tesa Powerbond (Waterproof/Bathroom), or heavy-duty acrylic nano tape.

  • Surface Prep: Clean and degrease both tile surfaces thoroughly with isopropyl alcohol (IPA) to remove dust, soap scum, or limescale.

  • Curing Time: Press firmly into the corner for at least 30–60 seconds, and let the adhesive cure for 24 hours before placing any weight on the shelf.

Print Settings

Parameter

Recommended Value

Material:

PETG (preferred for humidity, cleaning agents, and long-term durability)

Layer Height:

0.20 mm (Standard)

Walls / Perimeters:

3 to 4 (critical for rigid cantilever load support)

Infill:

15–20% (Gyroid)

Supports:

None (prints completely support-free flat on the bed)

Brim:

Optional / Not needed on a clean textured PEI plate

Tags