C110 Camera U1 Official Top Cover Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
C110 Camera U1 Official Top Cover Mount
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 38
- Makes
- 1
- Views
- 192
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Camera mount for the Tapo C110, for the Snapmaker U1 official top cover.
To install: Slide the camera into the mount, then lift the top cover up and slide the mount up onto the front alignment post (where the top cover goes into the rubber mounts in each corner). It can be installed on either side. Slide it all the way up, it should be snug. Then add the spacer underneath the camera mount on the same post.
The spacer prevents the toolhead from hitting the camera mount by keeping the mount lifted up a bit.
Picture added to help clarify where the spacer goes.
If you have a chamber heater I recommend printing out of ABS or ASA, if you do not have a chamber heater it likely doesn't matter.