Rust Lang Pins
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small pin featuring the Rust programming language logo.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 1
- Makes
- 0
- Views
- 13
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution
A small pin featuring the Rust programming language logo.
The model is printed flat and only requires a standard pin post and clutch to turn it into a wearable pin.
Looking for more Rust? Check out the matching Ferris (Rust Mascot Crab) Pin
Bill of Materials
You will need:
Instructions
Each pin consists of:
1 printed logo
1 pin post/back
1 pin clutch
Assembly is very simple, you only need to glue the pin post to the center of the back of the printed part. Let the glue dry and add the pin clutch.
Make sure the surfaces are clean before gluing, and avoid using too much glue as it may spread around the pin post.
Coloring
The design of the pin is made to be easily colored using height coloring (manual color swap friendly).
Printing recommendations
Use a 0.2 mm or 0.4 mm nozzle with the Arachne wall generator enabled in your slicer for the best results.
If you experience adhesion issues, make sure your build plate is thoroughly cleaned.
Design
This model is based on the official Rust logo available from the Rust Artwork repository and licensed under CC BY.
This is an unofficial, community-made design and is not affiliated with or endorsed by the Rust Project or the Rust Foundation.
The Rust name and logo are trademarks of the Rust Foundation.