Creality Hotend Heater Change Tool for K1 and Unicorn Nozzle series
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A tool for removing the heater block top thread on Creality K1 and Unicorn-series hotends.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 33
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Public Domain
Creality K1 / Unicorn Hotend — Heater Block Removal Tool
The heater on Creality K1 and Unicorn-series hotends fails fairly often — either the heating element burns out or a wire breaks.
Typical symptoms:
The thermistor still works and reads room temperature (28–32 °C), but the hotend never heats up.
The printer may show error code 2564.
Check it with a multimeter. If you get an open circuit, the heater is dead — on my tester that shows as 1. on the display, but other meters show OL or ∞.
You don't need to buy a complete hotend assembly. Replacing only the ceramic heater block is enough, and it costs far less than a full unit that includes the thermistor and everything else.
The problem is that the upper threaded section is often very hard to loosen by hand — that's why I made this tool.
Watch the thread direction. It is a left-hand (reverse) thread: turn the upper part clockwise (to the right) to loosen it.
Suggested print settings:
6 walls, 6 top and bottom layers, 40% infill
Or 4 walls, 4 top and bottom layers, 35% infill, with a modifier on the head section only at 6 walls / 40% infill