1 / 1
IKEA VIDGA Aqara E1 Curtain Driver Mount - Slide-In, No Glider Removal (204.830.02) — image 1

IKEA VIDGA Aqara E1 Curtain Driver Mount - Slide-In, No Glider Removal (204.830.02)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Two identical parts connect into a stable, smooth-gliding Aqara E1 mount for IKEA VIDGA rails. No gliders to remove.

Rating
0 / 5
Likes
5
Downloads
16
Makes
0
Views
139
Reviews
0

Updated at source:

Model information

Category
Living Room
License
Creative Commons — Attribution — Noncommercial

Check my other IKEA designs:

Mount for the Aqara Curtain Driver E1 (Track Version, CM-M01) on IKEA VIDGA rails.

Why this one

  • Glides really smoothly. The two parts connect to each other, so the Aqara stays stable on the rail.

  • You don't have to take down the curtain or remove any gliders

  • No screws, no bearings, no tools

  • Print two identical parts. One STL is all you need.

  • Takes the place of two gliders from the VIDGA "Glider and hook" set (204.830.02)

Installation

  1. Slide the first part into the rail slot.

  2. Slide the second part in right next to it.

  3. Align the two parts.

  4. Hang the Aqara E1 on the mount.

Compatible with:

  • VIDGA single track rail – 204.929.16

  • VIDGA single track set – 494.282.32

  • VIDGA curtain track set for ceiling, 2 tracks – 495.715.07

  • VIDGA two track set – 294.282.66

Not compatible with the E1 Rod Version.

Material and print settings

Use the most slippery filament you can print with. Listed from easiest to hardest to print:

  • PETG – tested. Easy to print and glides well.

  • ASA / ABS – untested. Handles heat better, but needs an enclosure.

  • Low-friction "tribo" filaments (e.g. igus iglidur) – untested. Specs look great but expensive.

  • Nylon (PA) – tested. The most slippery option, but dry the filament first and expect higher print temperatures and warping.

  • Not recommended: PLA. It softens in the heat behind a sunny window and wears faster.

  • Wall loops: 3–4

  • Infill: I printed with 40% but didn't test other settings

  • Quantity: 2 identical parts

Tips

  • A little silicone lubricant in the rail makes gliding even smoother.

  • Skip oil-based sprays like WD-40, because they collect dust.

  • Check that the rail sections are aligned and the joints between them are smooth. If a cut end is rough, sand it.

Tags