Zooz ZSE44 Grow Tent Tube Mount – 16mm & 22mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount a Zooz ZSE44 Z-Wave temperature and humidity sensor to 16 mm or 22 mm grow-tent tubing.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 0
- Makes
- 0
- Views
- 17
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Mount a ZOOZ ZSE44 Temperature & Humidity Sensor directly to your grow-tent frame for convenient environmental monitoring through your Z-Wave home automation system.
The mount allows the ZSE44 to be positioned directly on the tent tubing, providing an easy way to monitor temperature and relative humidity inside your grow tent without adding a separate display or dedicated monitoring system.
Two models are included for common grow-tent tube sizes:
16 mm
22 mm
Simply print the version that matches your grow-tent frame.
The snap-on design makes installation quick and allows the sensor to be easily repositioned as your grow-tent configuration changes.
Home Automation
Using the Zooz ZSE44 allows temperature and humidity readings from your grow tent to become part of your existing Z-Wave home automation system.
Depending on your automation platform, the sensor data can be used for monitoring, dashboards, alerts, historical tracking, or automations involving ventilation and other grow-tent equipment.
Installation
Print the 16 mm or 22 mm version for your grow-tent tubing.
Install the ZOOZ ZSE44 into the mount.
Snap the completed assembly onto the grow-tent pole.
Pair the ZSE44 with your Z-Wave controller or home automation platform if it has not already been paired.
Position the sensor at the desired location within the tent.
The mount can be removed and repositioned without modifying the grow-tent frame.
Print Settings
Materials: PLA, PETG, or ABS
Layer Height: Tested at 0.16 mm and 0.20 mm
Infill: 15% Gyroid, or print solid if preferred
Supports: None required when printed with the orientation provided
Filament Condition
For best results, make sure your filament is dry before printing. Moisture-contaminated filament can result in poor layer adhesion and weaker, more brittle finished parts. This is particularly important for snap-fit clips and other parts that must flex during installation.
If a printed model seems unusually brittle or breaks easily when being snapped onto the tubing, check and dry your filament before assuming the model needs additional strength or infill.