1 / 2
Bosch / Siemens Dishwasher Aquastop Nut Wrench — image 1
1 / 2

Bosch / Siemens Dishwasher Aquastop Nut Wrench

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Bosch Siemens Aquastop 3/4" Dishwasher Hose Nut Wrench

Rating
0 / 5
Likes
1
Downloads
5
Makes
0
Views
27
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Public Domain

A simple 3D-printable hand wrench for loosening the plastic Aquastop inlet hose nut used on Bosch / Siemens dishwashers.

The wrench engages the 12 ribs around the nut and can be installed from the side, so there is no need to remove the Aquastop housing first.

It was designed for a nut with an outer diameter of approximately 37.3 mm and 12 evenly spaced ribs.

The integrated handle provides a comfortable grip and enough leverage to loosen or tighten the nut by hand without using pliers, which can easily damage the plastic.

Main dimensions:

  • Nut outer diameter: ~37.3 mm

  • 12 engagement ribs

  • Side-opening design

  • Designed for hand operation

Print settings

I printed the wrench in PETG.

Since the tool can be subjected to fairly high torque, I recommend using at least 5–6 walls/perimeters and a relatively high infill, around 40–60%, to keep the body and handle rigid.

Increasing the number of walls is especially important around the engagement area, as this part takes most of the load when loosening a tight nut.

No supports should be required if the model is oriented with the flat side on the build plate.

Before printing, check that your Aquastop nut has the same dimensions, as similar-looking fittings may differ between dishwasher models.

Tags