1 / 4
CNC Voron Tap V2 – Unofficial CAD Reconstruction (STEP + F3D) — image 1
1 / 4

CNC Voron Tap V2 – Unofficial CAD Reconstruction (STEP + F3D)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Reference CAD model of the CNC aluminium Voron Tap V2, for toolhead design

Rating
0 / 5
Likes
9
Downloads
71
Makes
0
Views
180
Reviews
0

Updated at source:

Model information

License
Open Community License v1.1 + Research & Development v1

An independent, unofficial 3D reconstruction of the CNC aluminium Voron Tap V2 probe. It was modelled from the build guide drawings and from measurements taken on a real part.

☕ Found this useful? We're raising funds for a CNC mill → https://gofund.me/812b7721a

What it is for: designing toolheads, part-cooling ducts, cable management and other mods around the CNC Tap V2 when no official CAD is available. It is a reference model, not a drawing for making copies of the product.

⚠ Not affiliated with, endorsed by or supported by ChaoticLab or Voron Design. Dimensions are the best available estimate: check the critical ones on your own part.

What's included

  • Full assembly (STEP): 54 solids in 14 named components

  • Separate STEP files: front plate, lower plate, sensor bracket, belt clamps, optical sensor PCB, magnets, MGN7 rail and MGN7H carriage, and all the screws

  • The Fusion 360 source (.f3d), with materials assigned

  • Every part keeps its assembly position, so single files line up when you import them together

Key data

  • Body ≈ 45.8 × 66.5 mm (W × H)

  • MGN12H mount: 20 × 20 mm, M3

  • Top accessory holes: 2 × M3, 40 mm apart

  • Probe travel to the mechanical stop: 3.0 mm, measured on the real part

  • Modelled mass: ≈ 53.5 g

  • Units: mm

Known limits

  • The magnets are modelled as a realistic trapezoidal pair (3 mm), not as a catalogue part you can buy.

  • The PCB is simplified from photos.

  • Some internal features can't be measured without taking the part apart; those are best estimates.

Credits

Voron Tap by Voron Design (github.com/VoronDesign/Voron-Tap). The CNC Tap V2 hardware is by ChaoticLab; this model is an independent reconstruction. The Voron logo belongs to Voron Design.

Support

This model took many hours of measuring and modelling, and it's free. If it saved you time, please consider a donation to our GoFundMe. We're raising money for a CNC mill, so we can make parts like this one ourselves:

👉 https://gofund.me/812b7721a

Sharing the link helps too. Thank you!

Tags