1 / 1
Ds Lite Speaker Ring Cushion
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I lost one of the ring shaped pads while replacing the screen on my DS Lite, so I made a replacement printed from TPU.
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 3
- Makes
- 0
- Views
- 23
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution
Any default layer resolution of 0.1-0.2mm should work fine.
TPU material
The OEM version of these measure close to 0.25mm. Since they are original a sort of foam, it's possible they have compressed a little over time. Most slicers default the first layer to 0.2mm, so I made the part thickness itself 0.35mm so the slicer would round up and create a 2nd layer since any extra thickness is still very small and can be compressed. The layer heights you select for printing really wont matter much.