1 / 3
Enclosure Case for Adafruit SHT40, SHT41, and SHT45 Temperature & Humidity Sensors — image 1
1 / 3

Enclosure Case for Adafruit SHT40, SHT41, and SHT45 Temperature & Humidity Sensors

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Adafruit SHT40, SHT41, and SHT45 Sensor case

Rating
0 / 5
Likes
3
Downloads
52
Makes
0
Views
164
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

Case for Adafruit SHT40, SHT41, and SHT45 Temperature & Humidity Sensors

MODEL REMOVAL NOTICE :
Download while you can will be removing this model at the end of the month !
because no appreciation for the work being shared will not be further improvements or versions.

This model is 100% free and open-source. I don't run a Patreon or ask for money, all I ask in return for the hours spent prototyping is that you hit the ❤ Like button or post a picture of your build. It takes one second, costs nothing, and tells me the design was worth sharing.

I2c Adafruit SHT40, SHT41, and SHT45 Temperature & Humidity Sensors 

Features :

  • fixing point for cable tie to clamp cable for cable relief 

  • Vented slots for vertical or horizontal mounting air flow

  • protects delicate electronics from bumps or debris

  • mounting holes for screws or can be fixed with double sided tape or silicone

  • Press fit angled vented lid

Printing :

No supports needed
2-3 parameters
15% infill
 
Printed in ASA-CF for heat resistance 

Building :
You will need one of the SHT4x I2C Sensor Modules found here:

SHT45 I2c Precision Temperature Humidity Sensor Module 0.1°C Precision :
https://link.amazon/B02hb8owC

SHT41 I2C Temperature Humidity Sensor Module ±0.2℃ Precision :
https://link.amazon/B0d9eRD96

SHT40 I2C Temperature Humidity Sensor Module ±0.2℃ Precision :
https://link.amazon/B049WdmKe

3 x small plastic screws 
https://link.amazon/B0hY2dglY

Uses 3 of the 4 screw holes for mounting as the cable slips under the board for direct connection to pads or JST connectors.

Screws are tiny the holes in the posts are 1.6-1.8mm the holes in the board are only 2.5mm , plastic screws from a watch or small electronic devices etc is what i used to secure the board to the model, and a small cable tie to secure the cable or you can silicone the cable into the hole.

Happy printing.

Tags