Raspberry Camera Module with Automatic IR-Cut Switching - 6mm Shortened Mod for 25mm IR Camera
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Functional remix shortened by 6mm along uniform sections to fit smaller 25mm wide IR camera modules.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 16
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Description
Overview
This is a functional remix of angelnu's Raspberry Camera Module mount.
The original design was sized for a larger camera module and didn't fit the standard 25mm x 25mm OV5647 IR camera module. I modified the geometry by shortening the body along its uniform sections by 6mm, resulting in a perfect, secure fit for the 25mm module.
Key Modifications
Length Reduction: Shortened by 6mm across the uniform sections to fit the 25mm x 25mm OV5647 board dimensions.
Fitment: Snug, precision alignment for the lens and IR light mounts without slop.
Included Files
Pi-Camera-LC26-attachment-6mm-narrower.stl– Main housing / camera mountPi-Camera-LC26-frontplate-6mm-narrower.stl– Front cover / framePi-Camera-LC26-backplate-6mm-narrower.stl– Backing plate / mounting bracket
Print Recommendations
Material: ABS
Layer Height: 0.20mm (or 0.16mm for tighter thread/screw tolerances)
Infill: 15%–20% (Grid or Gyroid)
Supports: Not necessary.