Search results: shortened

Merkur Futur Shaver Holder Shortened

Just a shorter version of the original.

Childproof Drawer Safety Lock - Hook and Latch (Shortened Height and Extended Latch)

A simple hook and latch drawer lock to prevent prying toddler hands from opening drawers and accessing their contents. Few other drawer locks work for my drawers, which are mounted into a face frame and have drawer fronts with narrow…

Shortened version of V4 suppressor

I remixed n.leinad great design to make it a bit more of a workhorse. I enjoyed the original design, but from previous experience with suppressors with lots of baffles, adding more baffles after 4, the noise attenuation is unnoticable…

Shortened Toothpaste Tube Squeezer

Shortened 9mm to better match toothpaste tubes common where I live. Now fits tubes up to 60mm wide. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0.2 Infill: 25% Notes: Translucent blue printed in…

Dummy 13 Swords Shortened Handles resized 200%

Dummy 13 Swords Shortened Handles resized 200% handles were shortened to fit better with hat accessories

Dummy 13 Swords Shortened Handles resized 250%

Dummy 13 Swords Shortened Handles resized 250% shortened handles to better fit hat accessories

Shortened Smol Bottle Opener

This is a remix of the Smol Bottle Opener where the part that pushes the cap from above is moved closer to the handle, creating a different lever angle. Printed successfully on Prusa Mini+ with settings: Prusament PLA Layer height: 0.2mm…

Ender 3 V3 SE - Z Axis Reverse Bowden Mount Shortened

Shortened the mount. Print as usual. No issues. Trying to keep the footprint of the printer as small as possible especially since it will be going into a DIY enclosure soon.

Nerf Index Grip (shortened)

Just a slightly shortened version of the original index grip. I removed about 2.5cm from the front to look better on shorter barrels without sacrificing the index finger grip. Use with the original grip key.

Shortened remix of Flexi-Conda

Shortened modifications of Flexi-Conda and Brick-Flexi-Conda models. Remix is based on several modifications of the original models - both variants of the flexible snake in 3, 4 and 5 link variants. The original model has nine links - so…

Steam Deck Insert EU plug shortened

This adds three changes compared to the one made by Dave: 1. Make it 6mm shorter (so it fits in the slot better) 2. Remove the bars on the bottom as they don't seem to be doing anything and are prone to breaking 3. Make the dock slightly…

Shortened Gridfinity Base for Ikea Alex

The original didn't fit well for me so I shortened the spacer length on the L2 piece by 2mm.

SV08 Simplified/Shortened Chain End

Shortened length of end part to make it easier to connect. Simplified the design to allow upside down printing. Print Notes: Orient upside down. Use plate supports for snap lips. If you plan to print high temp filaments, print the…

Vulture's Leg - Shortened Remix!

SEE REMIX IF YOUR VULTURE KIT USES THE DRUM SPRING This is a full replacement for the entire front-assembly of the Vulture blaster. This means that every part of the breech, barrel, and magazine assembly have been redone. The only…

DIN Rail Shortened

Remix of Petr Bravenec's design, shortened to fit my use-case. Mount hole dimensions are unaffected.

Voron 2.4 Purge Bucket - for right extrusion, and shortened

Note: original mod is https://github.com/VoronDesign/VoronUsers/tree/master/orphaned_mods/printer_mods/edwardyeeks/Decontaminator_Purge_Bucket_&_Nozzle_Scrubber also found on Printables at…

MK3S+ LCD Mounts - shortened

The LCD mounts that shipped with the MK3S+ annoyed me with how far they stuck out past the frame. These mounts are 1/2" (12.2mm) shorter, allowing the LCD to sit closer to the frame and thus making the overall foot print smaller. All the…

Dn Pstl - Shortened Dan Pistol

Shortened the original Dan Pistol by 50mm overall with a 25mm reduced draw to improve flubbing at low fps. Comfortably hits 100-130fps with small sections of k25 spring and a barrel flush to the shroud. Length Changes: Shortened: slide…

Ninja Luxe Cafe Funnel Shortened

We found that with smaller amounts of grounds the portafilter funnel included with the Ninja Luxe does not let you tamp down as far as needed resulting in a sour cup of espresso. I've therefore created a shorter version that will let you…

Dummy 13 Big Gun Shortened Barrel Extended End resized 250%

Dummy 13 Big Gun Shortened Barrel Extended End resized 250%

Dummy 13 Big Gun Shortened Barrel Extended End resized 200%

Dummy 13 Big Gun Shortened Barrel Extended End resized 200%

Childproof Safety Lock - Shortened Height Remix

I printed a bunch of eric-ao's safety locks for my own drawers but ran into a few cases where the gap I had was just too narrow. Simply height adjustments to make it fit in some tighter spaces more easily. Printed at .2mm layer height in…

Prusa MK4 / MK3 Shortened Spool Holder Endpart

I bought from Prusa a second original spool holder in order to hold 4 spools at a time in my little enclosure. But original holders endpart are way too large for only 1 kg spools and take too much space in my expected configuration. So, I…

REMIX - Bambu Lab X1-C P1P Vented Lid Riser (with room for LED strip) - Shortened Rear Pieces

I had the same problem as one of the other commentors. Once printed, the frame was slightly too large to fit on top of the X1C. I removed 1.5mm from each of the rear pieces between the last vent hole and the corner. The glass still fits…

IKEA Alex Handle (old version) 1mm shortened on top

Remix of Jallims Handle V1 with a bigger gap between shelves for easier sliding

Triumph Thruxton 900 Front Fender Mudguard Shortened

This is a replacement for front shortened mudguard for Triumph Thruxton for a sportier look. Should be printed in ASA for UV durability.

Shortened door for collectable card tambour box

Angle the model on the print bed and it will fit a typical prusa MK4 style print bed. See original post for the rest of the model.

Tesla Model Y Rear Seatbelt Guide (Shortened for Smaller Printers)

This is a modified version of the Tesla Model Y rear seatbelt guide (original model: https://www.printables.com/model/251256-tesla-model-y-rear-seatbelt-guide ). The original model had a length of 264mm, which exceeded my printer's 260mm…

Shortened Screw Pin (Slaughter to Prevail mask)

2.5mm worked best after my measurements, If someone needs a slightly different size I also added 2mm less and 3mm less.

ZeroClick Center Dock shortened for DragonBurner

I shortened the Center Dock by 5mm, because my DragonBurner Toolhead with the integrated ZeroClick Mount didn't reach the parked probe fully.

Shortened Nerf Recon/Retaliator Inspired N-Strike Barrel

Hello everyone! This is a 3D printable Nerf N-Strike Barrel that I have designed to resemble a shortened Nerf Recon/Retaliator Barrel. I’ve always loved the look of the N-Strike line of blasters, and arguably the most emblematic part of…

thumb stick extender for switch (Shortened version)

extender of the overly short inaccurate JoyCon thumb sticks. this is a shortened version of an original design. the original version is grate if you like long thumb sticks. How ever I did not like them so i shortened them. Recommend…

Shortened Gridfinity Tap and Die Storage

Chopped about 10mm out of the middle of the models in 3D Builder. The Die holders are slightly taller due to the orientation. The original author made this for a Craftsman set. The Harbor Freight Metric/Imperial sets appear to fit nicely.…

(shortened snub pistol ver) Star Wars Battlefront II 2005 version DC15 pistol clone blaster

Howdy, still a learner at 3D modelling, I have today my attempt to create a shortened more pistol like variant of the DC15 blaster pistol from the OG Star Wars Battlefront games from 2005. This is my own design using the game blaster…

3dconnexion SpaceNavigator Handrest shortened

This is a handrest for the SpaceNavigator Desktop edition. Your SpaceNavigator won't move around anymore when using it! I made DarthBane's model a bit smaller so I could print it on my Prusa Mini. You can either cut the pad out of foam…

Skadis router attachment bracket - shortened and screwless

About I remixed the router attachment brackets from ayanev ( https://www.printables.com/model/249532-ikea-skadis-wifi-router-attachment-bracket ) to allow for mounting without screws. I shortened the wings to fit some of my smaller…

V2 Modular plant support / plant trellis - bottom part shortened to fit on Prusa Mini

Shortened version of the bottom part of the original model from @TomekZimoch to fit on the Prusa Mini.

Nebula Camera Mount for Creality Enclosure (Shortened)

Printed in ASA. Printed 12mm camera mount screw to attach camera, but not necessary. Camera fits tightly.

AX24 - Shortened Aftermarket Servo Mount - Remixed

AX24 - Shortened Aftermarket Servo Mount - Remix Shortened Aftermarket Servo Mounts for the Axial AX24. A couple of mm was trimmed off of the front of the original, moving the servo closer to the center of the vehicle, which seemed to…

(short Halo Magnum style version) (shortened snub pistol ver) Star Wars Battlefront II 2005 version DC15 pistol clone blaster

Howdy, still a learner at 3D modelling, I have today my attempt to create a shortened more pistol like variant of the DC15 blaster pistol from the OG Star Wars Battlefront games from 2005. This is my own design using the game blaster…

Repwinder - Shortened End Caps

I've shortened the end caps for the repwinder. For the locking screw version, I removed the ratchet as that should only be needed on one side. I then shortened it by 0.8mm. For the other end, I also shortened it by 1mm, and left an indent…

Quest 2 Elite Strap to Quest 3 strap replacement (shortened for 220x220 beds)

This is the same model, but shortened by 15 mm to fit in size for 220x220 tables (like Sapphire Pro).

SV08 Shortened Drag Chain Mounting Clip

I had to remove 2 links of the drag chain that came with the SV08 enclosure kit due to the length of the stock cables. This prevents the Z gantry from reaching the last few mm of Z axis height without popping out the stock drag chain…

Shortened half dart cutter-38mm

I liked the original model but i wanted to make a smaller one to reduce time and material used.

Shortened "d1 gear and axle" for Antikythera Mecanism

This remix provides a shorter version of the “d1 gear and axle” that is part of the “Orange D-Axis and C-axis” folder for the Antikythera mechanism. When I assembled my clock, I found that the d1 axle stuck out the back of the D2 gear and…

Hot Wheels Inline Ramp Shortened

Shortened to fit on a 300mm bed.

Shortened version of Steyn's Print's shoot to enclosure mod

For whatever reason, some printers are about 25mm shorter between the IFS and enclosure hole. I shortened it to fit.

T300 hall sensor - shortened

T300 hall sensor, shortened version

shortened MMU3 PC4m10 Rear Connector

PC4m10 rear connector threads for the MMU3

Cereal Box Filament Spool Roller - Shortened Remix

dkrnet's original Cereal Box Filament Spool Roller is an amazing design; however, the stock base was just a little too tall for my Safeway-branded 15.3 cup cereal box. Thankfully he uploaded his original STEP file, making shortening the…

Headphone Stand - Shortened arm by 1 inch, Print flat with minimal support

Shortened the original model in CAD. The jpg shows you how to print it with minimal support. Category: Office

Ikea Lack adjustable feet for shortened legs

For a 3D printer table I wanted to use 2 Ikea Lack 50x50 tables. 2 times 45cm height would be a bit too much, so I shortened the legs of the bottom one of the two tables. In order to regain stability and for leveling the setup, I designed…

SV08 M12 Probe Sensor Shortened for LJ12A3-4-Z/AX

I modified the original version to allow a bit more space to work with Nadir's CN3D shrouds. To work with the M12 probe. Print in ABS. It will use the same hardware as the original design.

(Shortened) L114 Lanyard Enclosure for the Heltec T114 v2

(See original source model for printing instructions.)

IKEA LACK extra stability feet for shortened legs

I've cut off the IKEA LACK legs to 10,5cm and have inserted these feet at the bottom of the legs. My printer might have been a bit out-of-sync when printing so the dimensions might have to be adjusted a bit. If you print it and it doesn't…

Sunlu S4 5mm fan spacer - shortened

Brought the ends in 4mm so that the spacer doesn't hit the case in the middle.

Smiley Blaster – Shortened Kid-Friendly Stock (68mm shorter)

The original Smiley Blaster stock was a bit too long for my 8-year-old, so I created a shorter version in Tinkercad

Voron 2.4 300x300 removable door, shortened

I had to shorten the original model by 2.6mm to fit my V2.4 300x300; please measure twice before printing. 29

Shortened Shovel and Ice Scraper

Remix of: Fully 3D printable snow shovel-ice scrapper by Ematyk | Download free STL model | Printables.com I shortened the extension piece and the shovel head to fit in a 256x256x256 build volume in printers like the Bambu Lab X1 & P1…

Shortened Sanding Block

See original model. When and if the original creator will upload a shortened version of his own design, I strongly recommend using it instead of this one, since I retouched stl files in a rather rough manner. His work will probably be…

HP Prodesk rack, Shortened and slotted holes.

Shortened the original model and made the rack mounts slotted to allow some wiggle room.

wolverine claws shortened

just shortened the claws so the can be printed on a 200x 200 print bed but still fit in handle

IKEA VIMLE fold-out sofabed cushion holder shortened

Prevents the cushions from sliding/creeping forward.

Worker Kunlun shortened front

Uses RedCowl's fantastic barrel collet dev kit for barrel retention: ( Link ) The two big parts print muzzle-down. The lid (green) prints with the rearward-facing angled side on the bed. The little yellow hook prints on its side. Rail…

Godox DPIIIV Bowen Mount Shortened Bulb Cover

Shorter Godox Bulb Cover, specifically designed for DPIIIV Series Studio Lights. Likely compatible with many other Bowen mount compatible lights but I unfortunately do not have access to them to test. These were specifically designed with…

Anycubic ACE Pro Rollenführung mit gekürzten Flügeln/Führungen / Anycubic ACE Pro Filament Spool Guide with Shortened Wings

English version below the German description. Da die Führungen/Flügel beim Original, bei größeren oder zu vollen Spulen an der Rolle schleifen, habe ich nach der Original-Vorlage diese in SketchUp neu gezeichnet und die Führungen/Flügel…

Royal Enfield Interceptor 650 / Continental GT 650 Shortened Extension for Rear Turn Indicator

Print in 100% infill with ASA for UV resistance. You will need to buy alternative nut to secure the part to the rear indicator housing. The original version showed in the picture is may block certain hard/soft panniers luggage which…

Shortened axis for 2 digit counter

I found the original axis to be too long. This shortens the axis by 1mm, making the unit feel nice and solid.

Foxalien Masuter Pro Y shortened belt tensioner

This shorter Masuter Pro Y axis belt tensioner extends the stock Y axis work area up to 430mm. You will need: Longer belts Print 4 of them 4 M5 hex nuts Flip both Y end stop brackets on the frame by 180 degrees Move the front cable chain…

Thermaltake V21 shortened case feet for Ikea Kallax / Expedit

A simple shortened case foot design to let the Thermaltake V21 fit inside an Ikea Kallax or Expedit shelving unit. There is enough room left to put adhesive felt furniture pads on the case feet to reduce vibration and prevent scratching.…

Y Belt Holder One Part MK4 - Shortened to Avoid Collisions

I was having y-axis collisions, so I remixed M3D's mod of Rons' tensioner and the one-piece holder. My remixes are here - the tensioner and the holder (this model). After installing my modified housing I did not actually need this…

Playseat Challenge Shifter Holder Shortened Attachment

I shortened the fixation part to accomodate stiffening mods of the playseat challenge with it Here are the mods I am talking about: Brace https://www.thingiverse.com/thing:4944013 Joint Stiffening https://www.thingiverse.com/thing:2772442…

ERCF V2 angled mount (shortened feet)

I really like the original design. But my ERCF is not mounted on a Voron so I shortened the legs for a general design.

Shortened LCD support brackets for use with LACK pocket doors

All my printers are in LACK enclosures with Drakka01's excellent Pocket Doors , but the MK3S(+) printers stick out a bit too much to close the doors completely, if you want to have enough space in the back for the heat bed cable. I…

Minimus backplate BL/CR shortened arm

The location of the of the BLtouch sensor was a bit too far to the right for my liking. I've shortened the arm a little.

Nintendo Switch Cartridge holder/insert - Shortened

This is a remix of Kabliga's genius insert for Switch game boxes, shortened by 1.8 mm. I had to make it shorter to fit in my original Nintendo Switch game box. Despite my printer is dimensional accurate the original design won't fit.

2020 / Ender3 / U20 / LK1 shortened filament guide

(Almost) universal filament guide A bit of backstory I bought my first 3D printer a few weeks ago, already thought about and made some upgrades to it, but this is the first visible one. As a lot of you, I was tired of seeing my filament…

Shortened Servo Arm

Shorter Version of the Servo Arm for @GenericGeek V0 nozzle brush.

Shortened 7-slot cable rack

I needed a shorter version that would fit my printer and didn't need the drill holes as I'm attaching with stickies to my wall. Fusion drawing also included. approx 110x56mm Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2…

Shortened Voron 0.2 rear electronics fan panel for use with Voron 0.1 compact air filter system

This is a shortened version of the Voron 0.2 rear electronics fan panel to make it compatible with the Voron 0.1 compact air filter system .

Shortened exhaust duct for new upgraded K40 Laser, Model 2021

I received the updated Version of the K40 Laser (Vevor type with digital reading, emergency stop, light). It also had a new exhaust fan assembly, which is screwed directly to the exhaust duct. To fit the motorized lasertable…

Hovalin shortened neck

Shorter neck for the hovalin that will fit on a 200x200 bed. I cut off around an inch and a half of the part that goes over the violin. I had to position it manually in cura, and it was kind of a pain, but its doable. The pic shows how I…

Shortened Voron 0.2 rear electronics fan panel with 92mm fan support

This is a shortened version of the Voron 0.2 rear electronics fan panel to make it compatible with the Voron 0.1 compact air filter system and a 92mm fan.

Shortened Pint Bumper Guard (for small print beds)

Pint rear bumper guard (bumper slider?) to protect the bumper of my OneWheel Pint. Shortened and cut to fit my prusa mini I'd print it at 50% or greater infil. Use two-sided tape to secure. 🤙

Rook MK1 Speed Mod - Shortened Motor Mounts

I found that the XY gantry towers hit the motor mounts before the toolhead itself would have encountered any obstructions (namely the Z-belt idler) so I cut out a section of each mount to extend the travel further rearward. Using the X…

Shortened GoPro Stabilizer mount

While the original was excellent, it posed a problem as I had to use my firing hand to turn the GoPro on before drawing. Now I can use the index finger on the support hand to turn the recording on. Recommended print settings are the same…

Rack Shelf for CRS305-1G-4S+IN (Shortened and mirrored

Rack Shelf for CRS305-1G-4S+IN but shortened to save fillament, and mirrored to show the status lights better.

Anaesthesia Airway Tree - shortened version

Talon Fang MK2 Shortened Frontend

A shortened frontend for the Talon Fang Mk2. Made the priming handle on the side to reduce weight and size. An optional lower magwell is included to make it look like the normal talon claw magwell. Hardware- 1 top front threaded rod of 6…

Alchemist shortened 70mm prime plunger for low FPS

Alternate plunger and ram mod for Alchemist which allows it to use shorter springs with a shorter prime, to hit lower FPS. Its meant for HvZ or other low-cap gameplay. IMPORTANT: In order for the ram to cycle correctly with this shorter…

Voxelab Aquila Shortened Endstop with Pi Cam mount

I wanted a pi cam mount on the Z axis, similar to the one for the ender 3 https://www.thingiverse.com/thing:2886101 I added grip points to the shortened end stop to allow for the cam mount. I used a M3x8 bolt to secure the cam mount, but…

Creality K1 K1C Max Shortened Cable Chain Link Toolhead Mount Holder

Creality K1 / K1C / K1 Max Shortened Cable Chain Toolhead Mount Optimized Clearance: Engineered for the Creality K1, K1C, and K1 Max to reduce the mount length by 8 mm (shortened from 25 mm to 17 mm). This creates a tighter cable chain…

Shortened Spool Hub (81mm)

The V2 version of the Auto-Rewind Spool Holder is too long for this spoolholder rack , so I have shortened it to about 81mm so that it now fits.

Shortened Hakko FX-951 Key

It took a few iterations to get the right thickness and dimensions, designed from scratch to get the smallest footprint possible. At the time I only had a light filament so i first tried to darken the filament with a sharpie which didn't…

Mavic Air 2 Charging Stand Shortened

Back support shortened to fit my printer. Printed with tree support (later turned out that was a mistake...). WARNING: The charger brick is a very tight fit. Thanks ShaunDarkLord for the idea. Category: R/C Vehicles

Shortened dropper bottle holder

Cut a shelf to fit on my build plate. Category: Organization

3D Sets Sakura 240 Shortened Rear Axle Cardan Joint

Standard cardan joint file was causing binding in the middle of the rear suspension stroke. This is shortened by 1mm and allows the rear suspension to move freely. Category: R/C Vehicles

Shortened Filler stand for short rollers

This is just the original Filler stand with the feet shortened by 25mm to use less filament and look less weird when using shorter remixes like this one: https://www.thingiverse.com/thing:4930977 Print Settings Printer: Kingroon KP3S…

Shortened spring mount for the Tefifon

If you replace the pickup cartridge on a Tefifon (like here ) you might find that the tracking force is too high. The adjustment range of the original mount for the spring/dampener-combination is limited: So I designed a 3d printed…

Shortened Lack Stacker

This is for stacking Lack tables after cutting the legs down. I cut down the legs of a Lack to make my printer enclosure the same height as my workbench and to give me a smaller area to put the power supplies and small tools. Then I…