ES3C28P Enclosure / Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Enclosure for the ES3C28P board, commonly used for smart speakers and AI voice assistants.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 29
- Makes
- 1
- Views
- 109
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial
The case is designed for USB Type-C power only, with no space for a battery.
The two separate pins included in the model are button extenders.
You may need to enlarge the USB Type-C opening slightly. One of my cables had a particularly thick connector housing that didn't fit because of the insulation around it.
Assembly is simple: the protruding plastic posts are just melted with a soldering iron after assembly to hold everything together. I was too lazy to design any fancy snap-fit locks.
There is an opening on the back for the speaker included with the board. The speaker attaches directly to the PCB using the adhesive tape already applied to its back.
There is also a microphone opening on the front of the case.