Formula 1 Tire Customizable Shift Knob - Thrustmaster TH8S Shifter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
-AMS Not required! -No supports -No Brims -No gluing This Shift knob is designed to work with the Thrustmaster TH8S.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 9
- Makes
- 0
- Views
- 58
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Designed to resemble actual F1 tires, this print is practical and satisfies the car enthusiast need to modify and make your own! So get creative with color choices and post the results!
Remember to download the TH8S Adapter file from the Thrustmaster official Printables page as that is required to fit on a TH8S shift knob! (link below)
https://www.printables.com/model/1825116-thrustmaster-official-th8s-gear-knob-files
Print Settings
Printed on a Prusa Mini+
Nozzle: 4.0mm
Material: PLA
Temp: 200 C
Layer height: 0.15mm - .20mm (Lower than .15mm in not recommended for the tire)
For Center wheel lock: Print at half speed with a clean nozzle tip for best results
For Tire text/logo: Reduce print speed by half
At the end of the day you know your printer better than I do and all settings are a baseline. Tweak based on your knowledge and experience with your printer. If you have not printed text before or are unsure of the best setting it is highly recommended to do a 3D text calibration print to find the best setting for you. Typically being a lower temp, slower print speed, and switching to Arachne.