1 / 4
MAKITA 1806 Planer - Adapter for Vacuum cleaner — image 1
1 / 4

MAKITA 1806 Planer - Adapter for Vacuum cleaner

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A practical 3D-printed vacuum adapter for the Makita 1806 planer. Fits directly onto the original chip ejection outlet.

Rating
0 / 5
Likes
1
Downloads
1
Makes
1
Views
21
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

A practical workshop upgrade for the Makita 1806 electric planer, designed to make woodworking cleaner and more convenient.

This custom-designed 3D-printed adapter fits directly onto the planer's original chip ejection outlet, where wood shavings would otherwise be blown out onto the floor.

The adapter redirects the shavings into a connected vacuum cleaner, helping keep your workshop and work area cleaner while planing.

No glue, screws or permanent modifications to the original planer are required. Simply fit the adapter onto the original chip outlet and connect your vacuum hose.

Features

  • Designed for the Makita 1806 planer

  • Fits directly onto the original chip ejection outlet

  • Directs wood shavings into a connected vacuum cleaner

  • Vacuum hose connection opening: Ø 35.2 mm

  • Quick and easy to install and remove

  • No glue or screws required

  • No drilling, cutting or modifications to the planer

  • Practical accessory for woodworking and workshop use

  • Designed and tested in real-world use

Vacuum hose compatibility

The adapter features a 35.2 mm connection opening for a vacuum hose or tube.

If your hose or nozzle has a smaller diameter, you can adapt the connection using suitable adhesive tape to take up the clearance and achieve a snug fit.

Check that both connections are secure before operating the planer.

Installation

  1. Switch off the planer and disconnect it from the power supply.

  2. Fit the printed adapter directly onto the original chip ejection outlet.

  3. Connect a compatible vacuum hose or tube to the adapter.

  4. If necessary, use suitable adhesive tape to adapt a smaller hose or nozzle.

  5. Check that the adapter and hose are securely fitted before switching on the planer.

No permanent changes to the original machine are required.

Recommended print settings

These settings have been tested with this model.

  • Material: PETG – recommended

  • Layer height: 0.20 mm

  • Perimeters / wall loops: 4–5

  • Infill density: 0% – no infill required

  • Supports: Check the slicer preview and use the tested print orientation

Printing notes

The adapter has been successfully printed using 4–5 perimeters without any infill. The multiple wall loops provide the required strength while keeping the part lightweight and the interior free of infill.

PETG is the recommended material for this functional workshop accessory.

Files included

  • STL: Model geometry for use with your preferred slicer.

  • 3MF: Model file for convenient import and print preparation.

Important note

This is an independently designed 3D-printable accessory for the Makita 1806 planer. Check the fit of the printed adapter and vacuum hose before use.

Effective chip collection depends on the vacuum cleaner, hose diameter, airflow and the type of wood being planed.

Always disconnect the planer from the power supply before installing or removing the adapter.

Tags