1 / 4
800x480 Touchscreen Enclosure – 2-Piece Case with M3 Heat-Set Inserts — image 1
1 / 4

800x480 Touchscreen Enclosure – 2-Piece Case with M3 Heat-Set Inserts

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Two-piece 800x480 touchscreen case with M3 heat-set inserts and rear screw mounting.

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
8
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

A two-piece enclosure designed for an 800x480 touchscreen display (AliExpress link).

The enclosure consists of a front frame and a rear cover. The front part features dedicated slots for M3 heat-set inserts, while through-screws secure the display from the rear, keeping the screen firmly in place.

Features

  • Two-piece design: front frame and rear cover.

  • M3 heat-set inserts in the front part for secure fastening.

  • Rear-mounted through-screws to hold the display in place.

  • Designed for an 800x480 touchscreen display.

Assembly
Install the M3 heat-set inserts in the front part, position the display in the enclosure, and secure it using the through-screws from the rear.

Please check the dimensions and mounting-hole positions of your display before printing, as compatibility with other 800x480 screens is not guaranteed.

Hardware required

  • M3 heat-set inserts.

  • M3 screws of suitable length (not included).

Tags