1 / 3
52 mm / 60 mm Gauge Pod for the Dashboard – Universal, Stick-On, 3 Tilt Angles — image 1
1 / 3

52 mm / 60 mm Gauge Pod for the Dashboard – Universal, Stick-On, 3 Tilt Angles

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Universal dashboard pod for 52 mm gauges, 60 mm variants too. Sticks on with VHB, tilt 60/75/90°, no drilling.

Rating
0 / 5
Likes
0
Downloads
3
Makes
0
Views
17
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial

Sticks onto the dashboard with VHB and holds a 52 mm gauge facing the driver. Tilt 60, 75 or 90°, no drilling.

The pod sticks on top of the dashboard on the driver's side and holds a 52 mm gauge facing the driver. 60 mm gauges fit the “60 mm” variants.

  • Three tilt angles (60, 75 and 90°) compensate for the slope of the dashboard.

  • The flat bonding area is 60 × 70 mm for double-sided VHB tape. Nothing is drilled.

  • An M3 set screw on the side secures the gauge.

  • The cable runs forward through the hollow stand, e.g. into the gap at the windscreen.

  • Prints without supports.

Important: the top of the dashboard reaches ~89 °C in summer. Use ASA or ABS only.

Variants (all included)

  • Tilt 60° · 52 mm gauge

  • Tilt 75° · 52 mm gauge

  • Tilt 90° · 52 mm gauge

  • Tilt 60° · 60 mm gauge

  • Tilt 75° · 60 mm gauge

  • Tilt 90° · 60 mm gauge

Gauge bore: 52.79 mm (52 mm gauges, +0.4 mm clearance), 60.4 mm in the 60 mm variants.

Included

  • STL files for every variant, STEP of the default variant

  • 52 mm tolerance test ring – print it first

Safety

Stick it on the driver's side only, never on or in front of the passenger airbag cover. The pod must not block the view through the windscreen or of the speedometer and warning lights. Check it is secure before driving.

Hardware (not included)

  • 1 × VHB tape 3M 5952 or similar, 60 × 70 mm

  • 1 × M3 set screw or self-tapping M3 screw, 8–10 mm

Fit

VHB tape absorbs slight curvature; on strongly curved dashboards add a TPU shim. Bore +0.4 mm, verify with the test ring.

FAQ

Does a 60 mm gauge fit? Yes, in the “60 mm” variants: 60.4 mm bore for gauges with a 60 mm housing (e.g. Defi 60); the front ring rests on the cup rim. Gauges with a 52 mm housing take the 52 mm variant.

How it's made

Parametric CAD (build123d, Python), exact solids. The CAD code was written with an AI assistant and checked by us; no AI-generated meshes. Renders are made from the CAD in Blender.

License

Free under CC BY-NC 4.0: share and remix with attribution, no commercial use. Not an original part, no affiliation with any vehicle manufacturer.

Deutsch: Klebt mit VHB auf dem Armaturenbrett und hält ein 52-mm-Instrument zum Fahrer geneigt. Neigung 60, 75 oder 90°, ohne Bohren.

Print settings

  • Material: ASA (or ABS). No PLA – it softens in a hot car.

  • Layer height 0.2 mm, 4 walls, 20 % infill, no supports.

  • Orientation: Front face (toward the windscreen) on the bed, cup pointing up.

  • Print time approx. 4 h 10 min, about 65 g (default variant).

  • Print the 52 mm tolerance test ring first to check the gauge fit on your printer.

Installation

  1. Degrease the dashboard with isopropyl alcohol; on textured plastic apply adhesion promoter (3M Primer 94).

  2. Feed the cable through the stand from the front, insert the gauge, tighten the set screw hand-tight.

  3. Apply the VHB tape to the base, align the pod and press firmly for 30 s. Let it cure for 24 h.

Tags