LED Noodle Earrings - cr1025 battery holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A holder for a tiny cr1025 battery with holes for LEDs. Can be used to make glowing LED noodle earrings.
- Rating
- 0 / 5
- Likes
- 176
- Downloads
- 80
- Makes
- 0
- Views
- 2,214
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
These LED earrings are super simple to make and very eye-catching in low light. Perfect for parties, raves, festivals or just being fabulous at home :)
No soldering required!
You will need:
Noodle LEDs (like these ones)
CR1025 coin cell batteries
Earring studs with flat fronts
3D printed holder
Super glue
Simply insert the ends of the noodle LED so that the positive leg is wedged against the positive side of the battery and the negative leg is against the negative side. Use super glue to fix them in place if not wedged tight enough. Insert a thin piece of plastic between a leg and the battery to act as a switch if required.
Print Settings:
20% infill, support required (print upright)