1 / 9
Snapmaker U1 Toolhead Screw Map – Unclog Disassembly Tray (3×2, 4-color) — image 1
1 / 9

Snapmaker U1 Toolhead Screw Map – Unclog Disassembly Tray (3×2, 4-color)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

1:1 screw map tray for opening the Snapmaker U1 toolhead to clear a clog. Every screw goes back where it came out.

Rating
0 / 5
Likes
2
Downloads
5
Makes
0
Views
33
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Opening a U1 toolhead to clear a clog? This tray keeps every screw in the right place.

What it solves

A deep unclog means about 20 small screws, two hex keys and a few loose parts (spring, bearing, arm). In a cup, they get mixed up and putting it back together turns into guesswork.

What it does

  • 6 tiles, one per disassembly step, each drawn 1:1 like the real toolhead

  • Each screw has its own numbered sleeve (P1–P20), right where it came out

  • A white square around a sleeve = 1.5 mm hex key; no square = 2.0 mm

  • Pockets for the loose parts: bearing (tile 5), spring and arm (tile 6)

  • The tiles lock together into one tray and stack in a small box

How to use

1. Snap the tiles together: 1-2-3 on top, 4-5-6 below.

2. Follow the official Snapmaker guide (link below), one tile per step.

3. Every screw you remove goes into its numbered sleeve.

4. Reassemble in reverse: highest number first, back to P1.

5. Stack the tiles in the box for next time.

Files

  • 3MF with 2 build plates: the tray in 4 colors and the storage box (made in Snapmaker Orca, also opens in OrcaSlicer / Bambu Studio)

  • STLs: one per tile (single color) and the storage box

Print settings

  • Just 2 build plates: the whole tray (all 6 tiles) on one, the storage box on the other.

  • 0.4 mm nozzle · 0.2 mm layers · 10–15% infill · no supports · PLA or PETG

  • Base is black up to 5 mm; colors only on the top 3 mm, so few color changes. A toolchanger (Snapmaker U1, Prusa XL, Core One INDX) handles it best; with an MMU or AMS, expect more purge.

  • Single color works too.

Feedback, ideas and photos of your print are always welcome!

Safety: unload the filament, let the nozzle cool below 40 °C and unplug the printer first.

Official guide: https://wiki.snapmaker.com/en/snapmaker_u1/troubleshooting/toolhead_disassembly_and_reassembly

Not affiliated with Snapmaker. “Snapmaker” and “U1” only describe compatibility.

Tags