1 / 5
4-into-1 Turbo Merge Collector Cut Sleeve STL – 1-1/4" Sch 10, T4 Flange — image 1
1 / 5

4-into-1 Turbo Merge Collector Cut Sleeve STL – 1-1/4" Sch 10, T4 Flange

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Cut sleeves and test-fit collector for a 4-into-1 turbo merge collector on a T4 flange.

Rating
0 / 5
Likes
1
Downloads
0
Makes
0
Views
3
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

Printed cut sleeves and a 1:1 test-fit collector for a 4-into-1 slash-cut turbo merge collector.

Setup: 1-1/4" Sch 10 pipe (42.16 mm OD), 20° merge, T4 turbine flange.

WHAT'S HERE

- Cut sleeves (2 sleeves, one per pair of runners): runners 1 and 3, and 2 and 4, each cut square to 75 mm. Slide the sleeve on, trace the top edge, cut, file to the line.

- Test-fit collector: check the fit-up in plastic before you cut metal.

NEED A DIFFERENT COLLECTOR?

These files are one setup. The free Isomerge Merge Collector Calculator makes any of them:

- 4 to 8 runners

- 1-1/4", 1-1/2" or 2" pipe, Sch 5 / 10 / 40

- 10° to 30° merge angle, your own runner length

- Garrett V-band 76 / 92, T3 or T4 flange

- full-size paper cut templates (no 3D printer needed), sleeves and test collector for your printer

This collector in the calculator:

https://isomerge.app/collector/4-into-1-t4?n=4&pipe=1.25&sch=10&angle=20&flange=t4

PRINTING

Sleeves: PLA, 0.2 mm, lip down, no supports.

Collector: PLA, 0.2 mm, 6 walls, 15 % infill, supports touching the plate. About 160 g.

Plastic parts are for marking and test fitting only. Keep them away from exhaust heat.

HOW THESE ARE MADE

These parts are generated by the Isomerge calculator from exact pipe and flange dimensions, then checked by us. AI tools helped write the software.

Tags