6-into-1 Turbo Merge Collector Cut Sleeve STL – 1-1/4" Sch 10, Garrett V-band 76
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cut sleeve and test-fit collector for a 6-into-1 turbo merge collector on a Garrett V-band 76.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 0
- Makes
- 0
- Views
- 3
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
A printed cut sleeve and a 1:1 test-fit collector for a 6-into-1 slash-cut turbo merge collector.
Setup: 1-1/4" Sch 10 pipe (42.16 mm OD), 20° merge, Garrett V-band 76.2 turbine flange
(GT30/GTX30, GT35/GTX35, G25, G30, G35).
WHAT'S HERE
- Cut sleeve (1 sleeve, used for all 6 runners): cut each runner square to 105 mm, slide the sleeve on, trace the top edge, cut, file to the line.
- Test-fit collector: check the fit-up in plastic before you cut metal.
NEED A DIFFERENT COLLECTOR?
These files are one setup. The free Isomerge Merge Collector Calculator makes any of them:
- 4 to 8 runners
- 1-1/4", 1-1/2" or 2" pipe, Sch 5 / 10 / 40
- 10° to 30° merge angle, your own runner length
- Garrett V-band 76 / 92, T3 or T4 flange
- full-size paper cut templates (no 3D printer needed), sleeves and test collector for your printer
This collector in the calculator:
PRINTING
Sleeve: PLA, 0.2 mm, lip down, no supports.
Collector: PLA, 0.2 mm, 6 walls, 15 % infill, supports touching the plate. About 134 g.
Plastic parts are for marking and test fitting only. Keep them away from exhaust heat.
HOW THESE ARE MADE
These parts are generated by the Isomerge calculator from exact pipe and flange dimensions, then checked by us. AI tools helped write the software.