1 lb. solder holder (Remix of Solder Holder by Leon@Matthews)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Needed a slightly larger spindle, spacers and pass-through for my 1 lb. solder spool. I remixed the parts I needed.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 38
- Makes
- 2
- Views
- 386
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
I remixed the solder holder by Leon@Matthews. I like his design but needed a slightly larger capacity and different size spindle for the spool.
The spacers, front pass-through for the solder and spindle are 58mm wide to accomodate the 1 lb. solder spool.
The spindle was changed in diameter to Ø19mm to fit the solder spool as well.
I used the original sides from his design and I like the honeycomb design.
The printing profile I used was .320mm layer height with a .6mm nozzle for fast printing. It would look better with a smaller layer height and a .4mm nozzle.
The remixed parts also use a M3 heat-set threaded insert in each end of the spacers and the solder pass-through. 8 total inserts and 10mm long M3 screws needed to assemble.