Counting matching models…
Strong crossbow made primarily out of 3D printed parts. This is not a toy. Crossbow had measured 70 lbs of force, but this depends on the amount of tensioning and used PETG strength. BOM and instructions are in the provided pdf assembly…
Peep sight rotation can be very annoying and time consuming to fix. One solution is to twist the bow string to perfectly align peep but it requires to have a bow press. One other, fast and easy solution is to use this little tool, that…
Pound coin shaped trolley token. The faces around the edge of the token are slightly curved for a realistic fit (real pound coins are not perfect dodecagons!) The tokens are available in either one or two tone models. If you only want to…
Micro Reverse Compound Crossbow Really fun for shooting on a magnetic dart plate. The parts are printed in PLA and PETG at 0.2mm layer height. Additional Hardware: 2 mm wire (I used a 2mm stainless steel tig welding rod) magnet D:6mm…
This model is a remix that adds a couple features. Three version are available. One with a deer silhouette, original, and deer silhouette with peg for holding your bow release. The hanger will hold over 25lbs. Happy printing
!!WARNING!! I am not a structural engineer! I am making this sh!t up as I go along. The risk I see with the project is the risk of the PETG limbs giving out while under tension. This could result in the limbs shattering. For safety sake,…
Playing around with more gear ratios. Might use this in a puzzle… Customized version of https://www.thingiverse.com/thing:3497579 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=3497579 Instructions…
Repose-arc à poulie en design bi-color (pas de double extrusion nécessaire) Branche noires imprimées en PETG, décorations, tenon et patin de fixation rouges en PLA Il faut prévoir une vis à tête creuse hexagonale ainsi qu'un contre-écrou…
This is a printable replacement magazine built mainly for the Diana, but it also has notches for the Worker Nightingale, and the Firerat (untested, also an uncommon blaster). It gravity drops from the Diana, but not the Nightingale. These…
A very quick & simple pound trolley token that you can keep on your keychain, compatible with all trolleys that take a pound coin. Printed mine in filamentum ASA (3 perimeters, 20% infill) but for something this simple I think it should…
This clamps on to the bow limbs and holds the bow upright. Can be used in different positions on the limb depending on bow config to keep it upright. Instructions Print out 2 pieces then bolt together with M8 hardware. The other two…
Stand for a compound bow with split limbs (with a 22+mm gap) like a Mission Switch. Inspired by https://www.thingiverse.com/thing:6541994 Designed to be printed with a TPU filament (photo: 0,8 mm nozzle, 0.5 mm layers).
Supermarket cart one pound coin.
!!WARNING!! I am not a structural engineer! I am making this shit up as I go along. The risk I see with the project is the risk of the PETG limbs giving out while under tension. This could result in the limbs shattering. For safety sake,…
Its here, Version 2 of the cycloidal reducer! All the hardware is the same from the original version, however every printed part has been redesigned! Here are the current improvements over the original: It is now easier to print and…
I've already used this gearbox to build a 5-axis robotic arm which will eventually also be available here. These gearboxes provide a lot of torque and are surprisingly durable with minimal backlash. They are not backdrivable. The photos…
This is a GoPro mount i designed myself in order to mount my GoPro to the stabilizer on my bow. There are others out there similar to this model, however this is my own creation that I started from scratch in OnShape. I did so because a…
A printable trolley token for UK supermarkets. One token the size of a £1 coin for trolleys that require the coin to go completely in and a double-ended one for those that push in from the side.
This is a wallmount for a compound bow like the EK Archery Assassin/Exterminator or other use cases - where ever a wall hook comes in handy, this should work. For the screws, the file supports diameters of 5,5mm for the screw and up to…
for NEMA17 stepper motor. fully printable. reduction ratio is 1:72.875 you need a 6806 bearing
Public domain model of an 18 pounder naval cannon by mayhem8166 . Originally uploaded to Blend Swap .
This is a compound bow stand with rubber sleeves/protection, for solid limbs. (In my case, a Diamond Medalist 38. Which has limbs 37mm wide, and 8-10mm thick). Print a right and a left leg, and two rubber sleeves. Four versions of the…
Keychain inspired by a compound bow. It has a small recess on the “riser window” area like in real bows. Cams have holes in them like the real ones. A 2.8mm hole is on the top cam to allow it to be used as a keychain. When printing make…
£1 Trolley Token designed to use only 0.88 grams of material and print in just under 4 minutes. Same shape as a British One Pound Coin, so be used in trolley's and swimming pool lockers. Recommended Print Settings Nozzle: 0.4mm Layer…
This is a 60.86 mm diameter by 352.49 mm high model of the M38A2 100 pound inert practice bomb. This was filled with sand and sometimes a small marker explosive then used during target practice in the forties and fifties. The originals…
Large “One-Way Pound Town Ticket” double-sided ticket for the MMU. I also included a single-sided version for a normal printer; just pause the print to change the color for the text layer. Size: 138mm x 70mm x 1.6mm Note: I designed this…
tool for setup right angle for arrow nocking point on compound bows
Printed using an Elegoo Mars with ABS-Like Resin. FDM should work as well, though. The brushes were taken from a popular brand (see pictures) The connecting bolt needs to be attached to the arrow receptacle after printing. Super glue…
V 6.5 of my 3d printed Tactical compound crossbow. <disclaimer> I am not a 3d designer. I can not use cad. I am a trained mechanical drafter,…ON PAPER. Yes I'm old enough that we didn't have CAD when I was in school. This means I'm a…
these need to be printed with supports.
Just a simple crate to hold four 1 lb propane tanks. Fits any LP gas tanks measuring 100mm or less in diameter. Provides a stable base for four tanks so they do not fall over or roll away in winds or when in boats/vehicles. I use mine on…
Ten Zone scope is a great value for money scope for compound bow, but lacks some accessories. Integrated shade is only 16mm in length, which can be to short if you're shooting in the morning or late in the afternoon. This sunshade is an…
Check out version 2 here ! At the moment (6/7/24) it is still in beta, but version 2 is still better in almost every possible way! Reduction specs: 64/1 reduction. NEMA 17 mounting. BOM: 4x M3x25 cap head bolts 2x 10x15x4 bearings 1x…
If you want the same look as on the picture then print them without top and bottom layer and set a cool infill pattern. Watch the YouTube video I created them for: https://youtu.be/ffg9dArNfCg Category: Signs & Logos
A fun print in place fidget toy that demonstrates the true power of gears to increase speed or torque. This is achieve by combining small spur gears with larger spur gears into compound gears. This download includes 2 different systems,…
This is for the Kobalt (Lowes hardware) 12 inch dual bevel sliding compound miter saw item# 0358936 / model# SM3055LW. I bought my saw probably 8 years ago now but I'm pretty sure they still sell a derivative of this saw at the stores. A…
This compound planetary gearhead is an anti-backlash version of my earlier Robot Actuator (smallest version): https://www.thingiverse.com/thing:3293562 It has about 50% more torque, significantly less backlash, and also runs more…
Print with original oriantation to allow for stongest directional strength for use. 4 wall thinkness and 20% infill worked for me.
2026_10_10: For the total masochists here's a link to the original plans if you would like to machine one from barstock: https://www.myheap.com/images/stories/Metalworking/Resources/downloads/ElmersEngines_byElmerVerburg.pdf 2020_04_07…
Print settings : TPU 95A 0% infill no supports 2 walls 2 top layers 2 bottom layers. Don't use “vase”/spiralized mode otherwise the print may fail on top/bottom parts because you'll see a gap in the model and i don't know if it will stay…
A decorative set to insert into the holes of the Mathews TRX 38 compound bow (and probably TRX 40 but I don't have one). Took me less than an hour to modelize and print (so why look at similar things on archery shops for around 20€…) You…
WW1 British 18-pounder artillery gun. Scaled to fit the WW1 British soldiers in my toy collection. $10/Month Club Tier: Grants a commercial license to manufacture and sell physical 3D prints of this model for as long as your subscription…
3D Printable Kick Stand for Compound Bows! Keep your compound bow safe and secure with our lightweight, durable 3D printable kick stand. Designed for easy printing and portability, this stand provides stable support for your bow, whether…
A Printable Sledge Hammer I printed this with a 1mm nozzle, .2mm layer heights with .6mm infill at 99%, total weight is 1.1 pounds. About 6.5 hours for the head and 5.5 for the handle vs. 40 hours just for the head at 4mm nozzle and .2mm…
This is a replacement for the crummy vacuum attachment (which broke on my saw) that allows you to attach a 4" dust collection duct to your Bosch hinged compound miter saw. Be careful which direction you slice this, as it needs to be…
Cleveland Browns Dawg Pound plaque designed to fit on a 220 x 200mm bed (Ender 3). The “trinkets” are designed to be printed in the correct color and then inserted into the base. I HIGHLY recommend you print the “Fit Test” base and…
Print the drop-in support block out PETG (or any other plastic that will not bond to the plastic used for the main model) and insert before the upper surface starts printing. It should key in to the hex cutout as shown below. Print main…
This is a zero clearance insert for the Ryobi TSS103 10 inch compound sliding miter saw. It's separated in two parts to fit most build plates. I made two versions, one of which has a solid block beneath to stop any dust from falling…
Adattatore per il montaggio della go pro su un arco compound.
Dominate your desk with this incredibly detailed military tank 3D model that brings battlefield authenticity to your collection! This meticulously crafted STL file features a heavily armored combat vehicle with realistic treads, armor…
Another demo of the Solid Compound Planetary Gearbox with updated source, tidying up and refining the geometry. SCAD is still an unreadable mess, but a slightly improved. Incorporating clamping jaws and knob options. Print in place, fully…
Just a simple one-piece holder for a single pound coin, to go on your keyring. Plus a pound-sized cylinder.
Remixed to add a key ring tab rather than just a hole
This 3D model represents a compound of a cube and an octahedron , inspired by a shape I discovered in a Wikipedia article. The geometric interplay between the two forms creates an elegant symmetry. The model prints easily without…
These herringbone spur gears fit the National Geographic Professional 2 Pound Rock Tumbler Kit , which is known for being much too fast compared to other popular tumblers on the market. This gear reduction slows the speed from about 80-85…
This is a remix of the V1 ( https://www.thingiverse.com/thing:5822012 ). This one is lighter and less bulky. Still the choice of 2 handle sizes. You have to glue de 2 legs (stans) equally the way you want. Post-Printing Category: Kitchen…
This is the skid plate for the Armortek 25 Pound Field Gun from WWII. Print solid and sand edges round. Print Settings Printer Brand: Up Printer: Up Plus2 Rafts: Yes Supports: Yes Resolution: .15 Infill: 100% Filament: Fillies ABS White…
This is a simple cam for a toy compound bow I designed just with some photoes of real cams Category: Sport & Outdoors
While learning about geometry, I came across a Wikipedia article on duality , which used a cube-octahedron compound as an example. Intrigued by the shape, I modeled it in CAD (…
Prints flat with no supports needed
Not yet finished, ultimately the OpenSCAD model will be published and customizable on Thingiverse. Here's a video of the thing in operation (gear ratio is -2209.85 to 1): https://youtu.be/GvXuM1YQFO8 Based on designs and lessons from GDFW…
This is a compound ornament to hang on your tree. Print instructions Category: Other Summary This is a compound ornament to hang on your tree. Instructions Definitely scale up the print, the default is quite small and not strong enough to…
So, I can't speak for those outside the US, but in the US, many nails and other fasteners are sold in small 1 lb (0.45 kg) boxes that are generally the same size: Length: 4.5in/11.43cm Width: 3.5in/8.89cm Height: 1.75in/4.445cm I wanted a…
Ripped straight from the fallout 76 game files
This model is compatible with the lego system.
Part holds a dial indicator on BXA sized tool posts. This allows the user to set the compound to the exact right angle to follow a tapered part for reproduction of that angle. This could be for a morse taper, R8 taper, or some other…
Molykote compound and other types of greases sometimes come in tubes without additional nozzles for finer dispensing. It is best printed with PP filament and a .25 nozzle. The model has a brim under which Scotch tape should be put. The…
Triangle pins hold the two halves together. The holes (the circular ones) should be on the same side so that they line up. The caps help keep the gears on the pegs.
To follow on from previous designs, if we target less extreme gear ratios we have more room to move with our choice of gears. In particular, it would be most beneficial to have fused sun gears in both stages. This would allow for the…
Printing Printed in Black PETG (spray painted with black outdoor paint to further limit UV exposure and to seal any potential gaps) at the following settings: Gyroid infill of 50%, 8 bottom layers, 0.2 layer height, 5 perimeters, 8 top…
Designed for mounting compound bows on Unistrut I print in PETG with 4 walls and found infill around 50% is good Print with the round part parallel to the build plate (not vertical) supports required Please test for yourself before…
small into big, works well to mitigate vibration
I could not break this, no matter how hard I tried. Tested as a shelf support with added weight (50lbs) How It Works: This corner bracket is engineered around one of the strongest shapes in structural design: the triangle. By reinforcing…
Input: 17 tooth sun gear Output: 44 tooth ring gear For strength, print with many shells. Print with a horizontal expansion of -0.05 or -0.01. Supports not needed. Print with a raft and set fade height to 1mm for accuracy. Step file is…
Replacement compound gear for an Intek TQ81Bc paper shredder 7T Straight Press = 30-deg module = 1.61 36T helical, 15-degree Press = 20-deg module = 0.82 FreeCAD file included When printing, you could slice the bottom of the model at…
I was inspired by Matt Parker's recent video ( https://youtu.be/oTWeuyDMgwo ) on compound platonic solid, and wanted to print a 5-cube compound platonic solid myself. I unfortunately could not find a good-quality 3d model of it, and…
Printed successfully! Tolerances are ok, M5 screws work without cutting threats. Added initials as a speziell touch. Hardware used: 1x M5 15mm flathead screw 1x M5 Washer 1x M5 selflocking nut 2x M5 Hexscrews aprox. 15mm 2x M5x15 Hexnut…
[HYP] COMPOUND BOW MOUNT THICK A WALL MOUNT FOR YOUR COMPOUND BOW, ► PRINT THE MODEL LYING SIDEWAYS. ► USE 4 OR MORE WALLS/PERIMETERS ► USE SAME NUMBER OF WALLS AS TOP AND BOTTOM LAYERS ► RECOMMENDED TO USE PETG/ABS OR ANYTHING TOUGHER ►…
Hi! This is my first CAD model ever. It took some math work to figure out rotation axes, angles and such, but i think it turned out fine and it was worth it. It's trickier to assemble than it looks!! You have to figure out not only where…
my compound planetary gearbox. 268.8 : 1 if you want to use your own motor you must make a new 'first stage sun gear' and 'motor holder'. for the sun gear: -10 teeth -module: 1.4 mm -pressure angle: 20 ° for the motor mount, the center of…
🔹 Description This is a 3D-printable toy crossbow pistol that uses a slide-cocking mechanism to arm the string. Racking the slide tensions the limbs and cams, making it easy to cock with one hand while keeping the mechanism compact and…
Holds 3@ arrows of diameter ~3.5-5.5mm (freecad file provided if your arrows are a different size). This is not really a remix, but an accessory for the Mini Compound Bow designed by DonStick3l... Don thanks for the wonderful design!:…
This assembly is used to help set the center shot on a compound bow. To complete this assembly the following is needed: Hardware: 4 - 10-24 countersunk head x 1.5" in length 2 - M6 Washers 1 - M6 Nylock Nut 2 - M6 Standard Nuts 2 - 10-24…
This page provides a few replacement parts for the Ultimate Foraging Wheel found at https://www.printables.com/model/1158725-ultimate-foraging-wheel-for-rats I wanted the wheel to be quicker and easier to refill, so I replaced the star…
This replaces the Chapin auger on the 80 and 100 pound salt spreader. It may be able to replace ones in other models of Chapin spreader. Replacement screws on shaft and uses retaining nut from old auger.
Just a simple compound bow and Arrow wall mounts. The arrow mount fits 10 of them. The first bow support holds the weight of the bow on the cable rod and the second support , which it's slightly longer, simply holds the bow from the limb.…
This is a design for a replacement insert for a DELTA 36-220 10-Inch Compound Miter saw. Print it with a fairly high infill, no support required, then screw it into the saw and with the saw running slowly lower the blade to cut the…
All versions of my 3D printable crossbow in one spot. This version will use a threaded rod to connect the parts of the stock. This will increase durability and will make it so you can change the nose out to test the different bow options…
PNX CHG-3617 — 36:1 FDM Compound Planetary Gearbox for Robot Joints https://youtube.com/shorts/Z76G_8fSFTo?feature=share Project Overview PNX CHG-3617 is a 36:1 FDM compound planetary gearbox for robot joints, designed to mount directly…
Tree ornaments made from the Regular Polyhedral Compounds These are: Compound of Five Cubes Compound of Two Tetrahedra Compound of Five Tetrahedra Compound of Ten Tetrahedra Compound of Five Octahedra These are provided as whole models,…
80 tooth gear attached to a 16 tooth gear with washers below each gear (apart from the base)
This 3d model represents the hyperbolic variation of the cube-octahedron compound. The geometry can be split into two mirrored halves for easy, support-free printing. Print Settings (I Used the Bambu Lab P1P): Nozzle: 0.4 mm Layer Height:…
Book nook A small section of a wooden sail ship, complete with gun port and printable in two parts . The print requires supports and takes a while, sorry! Its 20cm tall, 15cm deep, and 6cm wide. I printed the book nook on its side. The…
Everyone needs another trolley token… PLA, 15% infill, 0.2mm layers. Print on non-embossed face. Not much else to say…
While learning about geometry, I came across a Wikipedia article on duality , which used a cube-octahedron compound as an example. Intrigued by the shape, I modeled it in CAD (…
A quick project i made of modeling a pound coin only one side has been modeled
This is a bow press that I modeled and have not built. It uses a standard 8mm lead screw, nut, and a skate bearing. There are some purchased parts as well as a couple 3d printed parts. Welding would be required to build this. The steel…
![[HYP] COMPOUND BOW MOUNT THICK](https://media.printables.com/media/prints/d4fc90f1-5f0c-410f-83d6-95be71b61f6d/images/10088292_86276277-35b1-4511-aefe-928a334a5157_af1e722a-6c22-4031-8701-74f888c214c1/1.png)
