1 / 4
T-nut #4-40 x 3/16'' rotating V-Slot — image 1
1 / 4

T-nut #4-40 x 3/16'' rotating V-Slot

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

T-nut for 20x20 or 20x40 V-Slot aluminum extrusion (6 mm gap) compliant with original metal T-nut but adopted for…

Rating
5 / 5
Likes
157
Downloads
398
Makes
1
Views
1,655
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

T-nut for 20x20 or 20x40 V-Slot aluminum extrusion (6 mm gap) compliant with original metal T-nut but adopted for#4-40 x 3/16'' (width) x 1/16'' (height)'' nut.

It's a remix of my M3 T-nut for those who may not have Metric nuts and bolts: https://www.thingiverse.com/thing:3050607

Fits for most of the printers based on V-Slot, e.g. Creality (CR-10, Ender 3, Ender 5), Tevo (Tarantula, Tornado), Tronxy (X1, X3, X5S) and many more.

Put it in the profile slot and turn the bolt - it will turn and find its locking position.

Check out my other designs: https://www.thingiverse.com/DaVinci2000/designs

Print Settings

Printer Brand:

TEVO

Printer:

Tarantula

Rafts:

Doesn't Matter

Supports:

No

Resolution:

0.2

Infill:

100%

Filament: Any PETG / ABS Any


Notes:

Print very slow around 10 mm/s with a little (if single nut) or no cooling (batch) ideally with PETG or ABS, as those are not so brittle as PLA.

For best results and strength set in Cura:

Top Layers: 1000

Bottom Layers: 0

Top/Bottom Pattern: Concentric

Category: 3D Printer Parts

Tags