Philips Hue Signe (Clone)

I like Philips Hue, but its really expensive.

After some inspiration from others makers on Thingiverse and here on Prusa/Printables,
then I came up with this design.

It connect to Philips hue Bridge, and can be controlled in the philips hue app

For me, I ended up paying around 48 Euro's +- per light( the tall one with and overpowered power supply ), Thats with 24 Volt - RGB+CCT WRGBWW 

also, there is a couple of different versions, 

The Medium and Large models is for the bigger Led Controllers

And the Small model is for an Shelly RGBW 2 controller

Lid_Wide is for the Medium and Large 

And Lid_Small for the small version, but all of them fit, your choice :) 

--------------------------------------------------------------------------------------------------------------

I will link to the stuff i used, But i strongly recommend you to search and see if you can do it better/cheaper :) 

LED Driver: https://www.alu-profile-led.de/zigbee-rgb-cct-controller-miboxer-mi-light-fut039z_227796_189116

Led Strips: https://www.amazon.de/gp/product/B07SWBX81B/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

Power Supply: https://www.amazon.de/gp/product/B09BPXM2Z7/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

5.5mm 2.1mm  Jack Socket Panel Mount Connector:

https://www.aliexpress.com/item/32946945885.html?spm=a2g0o.productlist.0.0.1b8f4459AU1YWk&algo_pvid=87932231-195f-4fdb-8e54-3fd5b3a03cfa&algo_exp_id=87932231-195f-4fdb-8e54-3fd5b3a03cfa-0&pdp_ext_f=%7B%22sku_id%22%3A%2266244082374%22%7D&pdp_npi=2%40dis%21DKK%218.04%217.96%21%21%21%21%21%40210318be16634181701848830e903b%2166244082374%21sea&curPageLogUid=JG8TpOd4tn44

Alu Profile: https://www.alu-profile-led.de/led-alu-profile-eckprofil-ecke-rund-er-fuer-12-mm-led-streifen-weser_227078_125732

Thread Brass inserts:

https://www.aliexpress.com/item/1005002288716120.html?spm=a2g0o.order_list.0.0.c72c1802zvoaKF

Also you will need 3pcs M3x10MM Bolts per light

---------------------------------------------------

Print the items as imported, no need to adjust the orientation

My settings:
PETG

Layer height: 0.25-0.32
Perimeters: 3
Infill: 10%

No supports