Omron Mount for Creality Sprite Extruder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounting bracket for an Omron sensor on the Creality Sprite Extruder.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 58
- Makes
- 0
- Views
- 812
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This is a mounting bracket for an Omron-type sensor on the Creality Sprite Extruder.
Offsets are approximately -31.2 X by -41.0 Y.
I specifically used the TL-Q5MC2-Z because I had a pair of them lying around. M48 probe test indicated a deviation of less than 0.0015mm on my PEI spring steel bed which is plenty good for my purposes.
https://www.aliexpress.us/item/2255800003191221.html
IMPORTANT - You'll need to install a BAT85 diode to prevent your mainboard from frying itself. NERO 3D has a nice video on how to set this up and how to wire the probe.
https://youtu.be/ZF-XiKs-XUs
Wire the probe as shown in the video, plug the blue-black connector into the z-endstop probe port on your mainboard, then configure the following settings if you want to run this on Marlin:
#define FIX_MOUNTED_PROBE
#define NOZZLE_TO_PROBE_OFFSET { -31.2, -41.0, 0 }
The part doesn't need to be super durable since nothing contacts the bed - just strong enough to not be accidently snapped, I printed mine in HTPLA+ from FusionFilaments with 2 perimeters and 0.2mm layers.