1 / 6
Raspberry Pi Camera mount for Original Prusa Enclosure
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Get the perfect camera angle with this camera mount! Fits the Raspberry Pi Camera V2.
- Rating
- 5 / 5
- Likes
- 66
- Downloads
- 294
- Makes
- 9
- Views
- 2,180
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Perfect camera angle!
Doesn't block the light from the LED-addon and supports all the official prusa add-ons.
Fits the Raspberry Pi Camera V2
Part list
- PiCameraMount
- Raspberry Pi Camera V2 (and the cable)
- M3nS nut (2x) - (Prusa spare parts)
- M3x8 screw (3x) - (Included with the enclosure)
Assembly Instructions
Step 1 Nut insertion
- Insert the two M3nS nuts in the PiCameraMount.
- Using an Allen wrench, push the nuts through the slots to insure proper nut insertion.
Step 2 Camera preparation
- Connect the Raspberry Pi Camera with the cable.
Step 3 Camera installation
- Slide the camera inside the PiCameraMount.
- Secure the camera with a M3x8 screw in the highlighted hole.
Step 4 Enclosure Preparation
- Remove the nylon rivet located highlighted in the picture.
Step 5 PiCameraMount installation
- Align the holes on the PiCameraMount with the ones on the Enclosure.
- Secure the mount with two M3x8 screws.
Well done! Please post a make of your mount!
