Squash ball guide for clean half cut
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Squash balls are quite popular as a cheap vibration and sound dampening feet alternative, not only for 3D printers but…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 389
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Squash balls are quite popular as a cheap vibration and sound dampening feet alternative, not only for 3D printers but also for HiFi geeks like myself. I trowed together this little device that might help to get a cleaner cur when using half cut balls for low profile feets.
I added a M10 threaded 3D printable clamping screw but my advice is to get a proper M8 or 3/8" bolt/nut and use the attached turn handle with the hex recess with some glue instead.
Cutting tool: the usual cheap stuff with brake of blades about .5mm thick blade, lube it with soap for a easy cut.
Enjoy/ Stefan stockholmviews.com
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.4 nozzle, 0.2mm layer height 0.34 line width
Infill:
40-100
Filament: Your choice PLA is fine Any
Notes:
Print at any infill rate that you feel happy with and also depending of how often you intend to use this tool. This will take some time to print but give you a long lasting tool.
I may or may not upload a supplementary less sturdy variation if requests are frequently enough :D
How I Designed This
In F360 quick and dirty, not actually a cutting edge design ;)
Category: 3D Printer Accessories