Get Shifty Box REMIX
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
As i needet this to fit on a bigger table i changed the distance between the clips to 6cm (2,3622 inch). And in…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 105
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
As i needet this to fit on a bigger table i changed the distance between the clips to 6cm (2,3622 inch).
And in addition to that i also modified the stick and knob so that i can light it up a bit.
i used a WS2812b digital LED which lights up green and when a button is pushed it blinkes red.
Also if not used for a while it will go through a rainbow routine.
The wires for the LED run through the stick.
Use a transparrent filament for the knobV2_top (i used 5% infill)
Only thinges needed in addition to the original:
- 3 x M3x30 Bolts
- 3 x M3 Nuts
- 1 x M8x50 Bolt
- 1 x Digital LED
- some wires
- and if you want to diable the LED a switch. Just drilll a hole if you need.
Libraries needed for the code to run: Joystick and FastLED
If you dont need the led use GetShifty-WO-LED.ino
Print Settings
Printer:
Felix Tec 4
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0,1-0,2
Infill:
35
Category: Video Games