1 / 5
Portable Hinged Monitor Mount, Attaches Magnetically, Extendable. WORK IN PROGRESS. — image 1
1 / 5

Portable Hinged Monitor Mount, Attaches Magnetically, Extendable. WORK IN PROGRESS.

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Attaches to any portable monitor with 75mm x 75mm VESA mount screw holes. Magnetically attaches and extends/collapses.

Rating
0 / 5
Likes
38
Downloads
116
Makes
0
Views
2,771
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

This is a work in progress, feedback is welcome. The two CAD pictures are V3 and the other pictures are V2. V3 pictures coming soon. 

I made this with the intention of being able to attach different portable monitors to a “tough” laptop, it works well when attaching to a wall or desk as well. 

Each version will have an associated assembly instruction file you can download. 

Hardware used: V3.0 Current. GCODE and assembly instructions coming soon.

  • M5x150 aluminum internal threaded connecting rod QTY 1 https://www.mcmaster.com/7415N18/
  • M6x225 aluminum internal threaded connecting rod QTY 2 https://www.mcmaster.com/7415N25/
  • M6x18 low profile socket head screw QTY 4
  • M5x14 low profile socket head screw QTY 2
  • M3x3 heat set insert QTY 1
  • M3x5 heat set insert QTY 2
  • M3x12 socket head screw QTY 1
  • 32mm diameter 6mm thick heavy-duty magnet w/ center hole and countersink QTY 4 https://amzn.to/3R90Z09
  • M3x4 screw QTY 4 
  • M3 nut QTY 4

V2 

Printing

All printed in PLA with .4 nozzle and .2mm layer height. 

  • Currently I am trying out 50% gyroid infill on all parts.
  • Supports for VESA, hinge, and mounts. I'm trying out organic. 

Updates:

V3.0 2/8/23

Eliminating the need to place magnets within the printed parts. 1 mm material between magnets in previous version has been removed, allowing direct contact between magnets and easier removal via m3 screw and nut. 

Using M5 connecting rod as the Z-axis support to eliminate the need to thread long lengths or rod through multiple parts. Rod ends are now secured via m5x14 screw instead of heat set insert. M2 screws and heat set inserts are intended to use active pressure to keep the hinge in position along the Z/X-axis.

The VESA mount was slightly modified, moving the connecting rods closer to each other in increase strength. 

The top and bottom mounts have been optimized to decrease the Y-axis footprint and to maintain position while under load in different positions. 

Added bracer to keep X-axis rods inline.

V3.1 2/11/23

Hinge: increased Z-axis diameter. Added hole for M3 heat set insert for tensioner to screw into to provide pressure to the M5 rod. also increased the length along Z-axis to keep hinge from sliding down the rod. 

VESA: decreased guide hole tolerance to stiffen mounted monitor when in position. 

V3.2 2/14/23

Hinge:  Added hole for M3 heat set insert in rear position so the tensioner can be inserted while the screen is stowed, keeping the screen from jiggling around and storing the tensioner at the same time. Added a file for rod covers which are to be pushed in place, closing the large holes on the hinge. 

 

Tags